Equipment Photos

Equipment Details

Inventory Number: 64884
Category: Temperature Chambers
Manufacturer: Espec

Espec BTL-433 Temperature & Humidity Chamber, -20C to 180C, 4 Cu Ft. The Criterion BTL-433 can cycle temperatures at rates up to 1.5°C/m heat-up and 1.2°C/m cool-down, without requiring liquid nitrogen. Significant test time can be saved, as well as creating added thermal stress on your sample. Watlow F4 programmer/controller. 115V, 60Hz

Specifications of the Espec BTL-433 Temperature Humidty Chamber include:

  • Interior Volume: 4 cu. ft. / 110 Liters
  • Interior Dimensions: (W x D x H) 19.6" x 15" x 23.6" / 500 x 380 x 600 mm
  • Exterior Dimensions: (W x D x H) 30.25" x 33.5" x 46" / 770 x 850 x 1170 mm
  • Temperature Range: -20° to 180°C  -4° to 354°F
  • Humidity Range: (see datasheet chart for detail): 10% - 95% RH
  • Average Change Rate (rates lower with 50Hz power): 1.5°C/min heat & 1.2°C/min cool (empty)
Now (USD): $6,500.00

Products Similar to: Espec BTL 433

Used Tenney TUJR

Inventory Number: 64010
Now (USD): $4,950.00

Tenney Lunaire TUJR Ultra Low Temperature Environmental Chamber. The Tenney TUJR is a portable, self-contained, temperature-controlled test chamber. Compact exterior dimensions, in combination with ample interior workspace, make this chamber ideal for laboratory testing.The Tenney TUJR is well-suited for use in electronic, military, and pharmaceutical quality assurance and reliability testing, as well as research testing and production processes. As specified, the chamber is mechanically refrigerated by means of a cascade system of time proven design. Digital Programmable controller. Chart recorder. Specifications of the Tenney TUJR include: Temperature range of -75c to +200c. Interior Dimensions 11"L x 16"W x 12"H. Unit also has optional LN2 boost option installed for faster cool down times. 115V, 60Hz, 18A

Product Details

Used Tenney BTC

Inventory Number: 64066
Now (USD): $4,500.00

TENNEY BTC Benchtop Temperature Test Chamber. Digital programmable controller. Temp. Range: -70°C to +200°C. Inside Dimensions: 20” L x 19” W x 22” H. 2” cable port. 230V, 1 Ph, 60 Hz, 23A.

Product Details

Used Tenney BTC

Inventory Number: 64067
Now (USD): $4,500.00

TENNEY BTC Benchtop Temperature Test Chamber. Well suited for electronic, military, and pharmaceutical quality assurance and reliability testing, along with research testing and production processes. Digital programmable controller. Temp. Range: -70°C to +200°C. Inside Dimensions: 20” L x 19” W x 22” H. 2” cable port. 230V, 1 Ph, 60 Hz, 23A. Some minor scratches.

Product Details

Used Associated Environmental LH 1.5

Inventory Number: 64685
Now (USD): $4,950.00

Associated Environmental LH 1.5 Benchtop Temperature Humidity Test Chamber.


Temperature: -20°C to 94°C (-4°F to 201.2°F).

Humidity: 10-95% RH, limited by +4°C Td.
Digital programmable controller.

Interior: 14.0W x 13.0D x 13.0H (in).
120V, 60Hz, 13A.

Product Details

Used MPI Thermal TA-5000A-1-1

Inventory Number: 64807
Now (USD): $21,000.00

MPI Thermal Thermal Air TA-5000A-1-1 Temperature profiling Test System with Clamshell Test Chamber. Temperature Forcing Test System -80°C to +225°C.

The MPI ThermalAir TA-5000A is a compact, portable benchtop environmental heating and cooling temperature forcing air stream system. Instead of taking your parts that need temperature conditioning to an large oven or large environmental chamber, our thermal test system allows you to perform your thermal test temperature profiling right where you need it – at your test bench, on your production floor or in your test laboratory.

The ThermalAir TA-5000A Temperature Forcing System with a wide range of temperature capabilities. -80°C to +225°C environmental test. The TA-5000A is used for temperature testing in engineering product development test labs and production test floors for semiconductor IC devices and all kinds of electronic – non-electronic components and other parts and assemblies.

The unique architecture of the ThermalAir TA-5000A features unprecedented performance while saving up to 50% on electricity costs.

The MPI ThermalAir TA-5000A has a front panel display and a thermal head display. The thermal head color touch screen gives the user the ability to set temperature parameters and monitor all system operations at the test site location.

Features and benefits of the TA-5000A include:

  • Ultra Cold Temperatures maintained at 50Hz & 60Hz
  • Dual Touch Screens Front Panel & Thermal Head
  • Plug-in anywhere from 200 to 250VAC, 1Ø
  • ECO Smart DC system for up to 50% energy saving
  • No voltage configuration to use at different locations
  • Versatile Boom & Stand – Extended reach standard
  • SSD for thermal file management and data logging
  • Control Heated dry air purge for frost free operation
  • One touch Temp Cycle, Ramp, Soak and Dwell
  • Ultra low audible noise for quiet engineering lab use (DC Chiller)

Specifications of the MPI TA-5000A Temperature System include:

  • Airflow: High capacity 10 l/s (20 scfm) continuous airflow optimizes temperature transition rate and throughput.
  • Typical Temperature transition rate: -55° to +125°C: approximately 10 seconds and +125° to -55°C: approximately 10 seconds
  • Temperature Control: Environment Air or External DUT sensing directly at the DUT case to ±1.0°C
  • Temperature control Sensor Ports: Type T or Type K thermocouple, and 100 ohm RTD
  • Temperature set, display and resolution: ±0.1°C
  • Temperature Accuracy: 1.0°C ( calibrated to NIST standard)
  • Remote interface ports: Four: IEEE-488, RS232C, SOT/EOT/SFF, And Ethernet, 4 USB-Type A, 1 USB-Type B, VGA, LAN, PLUS
  • Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb. All this makes for simple control and service ability.

220V, 1Ph, 50/60Hz, 30A

Date of Manufacture 2020

Product Details

Used Espec SH-240S3

Inventory Number: 64824
Now (USD): $5,250.00

ESPEC SH-240S3 Bench Top Temperature and Humidity Chamber. Digital programmable controller. Temperature Range: -40°C to +130°C. Humidity Range: 30% to 95% rh. Inside Dimensions: 11½” L x 10” W x 11½” H. 115V, 50/60 Hz, 15A

Product Details

Used Cincinnati Sub Zero Z-8-1-1 H/AC

Inventory Number: 64858
Now (USD): $7,500.00

CINCINNATI SUB ZERO Z-8-1-1-H/AC Low Temperature Environmental Test Chamber. Digital programmable Watlow F4 controller. Watlow temperature limit controller. RS232 Communication port. Temperature Range: -68°C to +190°C. Inside Dimensions: 24” x 24” x 24”. Two 6” Cable ports. Glass viewport in door. 208V, 3 Ph, 60 Hz, 23A

Product Details

Used Espec BTZ-133

Inventory Number: 64865
Now (USD): $6,000.00

Espec BTZ-133 Temperature Chamber, -70C to 180C, 1.5 Cu Ft. With a narrower footprint and increased performance, the Espec BTZ-133 test chambers provide an economical and space-saving solution for cramped labs needing to do a variety of temperature testing. It has a 19.5 inch wide interior, which is 3.5 inches more than traditional benchtops, yet the exterior is 20% narrower. The Espec BTZ-133 can cycle temperatures at rates up to 3.5°C/minute. Interior dimensions 19.6"W x 11"D x 12"H (500 x 280 x 300 mm). Temperature Range -70°C to + 180°C. Two 2" cable ports in sides. Viewport on door. Interior light. Watlow F4 Digital programmable controller. 115V, 60Hz, 16A

Product Details

Used Espec EPL-4H

Inventory Number: 64868
Now (USD): $15,000.00

ESPEC EPL-4H Temperature Humidity Environmental Test Chamber -35°C to +180°C. The Espec EPL-4H Temperature and Humidity Chamber brings low maintenance, high reliability, unique design, and user-friendly features into a single chamber. Powered by forward-looking algorithms and electronic expansion valves, the user can expect fast ramping, better stabilization, and energy savings. The controller makes environmental testing easier along with the user interface with quick access to any screen. Standard USB and optional Ethernet interfaces make programming and data acquisition much simpler. Inside dimensions 32 cubic feet, 35"L x 39"W x 39"H. 4" cable port on side of chamber. Glass viewport in front door with interior light. 208V, 1Ph, 60Hz, 49A

Product Details

Used Tenney BTRC

Inventory Number: 64872
Now (USD): $7,950.00

Tenney BTRC Temperature and Humidity Test Chamber. Environmental temperature humidity system. Color LDC screen controller with real time graphic displays. RS232 data communications. Temperature Range: -70°C to +200°C. Humidity range 20% to 98% rh. Non CFC refrigerants. Inside Dimensions: 20” L x 19.5” W x 22” H. 1-inch and 2-inch cable ports on side. 240V, 1 Ph, 60 Hz, 23A

Product Details