Category Feed Subscribe to this Channel's RSS Feed

Water Chiller - Heaters

Accurate, consistent and reliable heat transfer in a lab environment is crucial and you need to be able to trust that your water chiller equipment is going to deliver uniform heat exchange every time. When you’re using second-hand, refurbished equipment, you want to know that it’s just as good as brand-new and won’t let you down.

Bid Service sources a wide range of used water chiller equipment, including non-refrigerated heat exchanges, water-to-water heat transfers, dual-channel chiller/heat exchangers, refrigerated recirculators and used circulating water baths, and more. We restore, refurbish and recalibrate used water chillers to factory standards to provide you with consistently reliable and uniform heat exchange.

We endeavour to carry a full and comprehensive range of refurbished heat exchange systems and more. As refurbishers and distributors of quality second-hand water chillers, our range can vary from time to time and we recommend browsing our site regularly, or getting in touch to find out if we’re carrying what you need.

We also buy used circulating water baths and others, so if you have any used equipment you wish to replace, or if you are moving, closing down a section of your operations, or need to sell a full operation, we will assess your second-hand equipment and make you an offer.

Used Advanced Thermal Sciences MVX-75

Inventory Number: 60817
Now (USD): $2,950.00

Advanced Thermal Sciences MVX-75 Water to Water Heat Exchanger. Heat transfer fluid flow variable 20-25 gpm adjustable pressure to 100 psig. Cooling Capacity: 50 to 60 deg C at 75000W. Heating Capacity: 240V at 5000W. Ethylene Glycol/DI water only. Reservoir Capacity: 5 gals. (19 liters). Operating Temp.: +20 to +60 deg C. One channel. 208V, 3 Ph, 50/60 Hz, 33A, CE.

Product Details

Used Haskris WW6

Inventory Number: 58701
Now (USD): $950.00

Haskris WW6 Water to Water Heat Exchanger. Cooling capacity determined by temperature and flow of house water. DT=15 deg F, 2 kW to 6 kW. Water Pump: 1.5 gpm. Reservoir Volume: 5 gals. 208/230V, 1 Ph, 60 Hz, 2.9A.

Product Details

Used Heat Exchange and Transfer SL500-12-WC-223

Inventory Number: 60818
Now (USD): $8,500.00

Heat Exchange and Transfer SL500-12-WC-223 Fluid Heat Transfer System. The SL Series of heat transfer systems are designed for closed loop temperature control of high temperature heat transfer fluids. 12 kilowatts. Maximum operating temperature of 500 deg F. Maximum pressure 100 psi. Touch Screen controller. Fluid Type: Therminol 66. Requires cooling water input. 220V, 3 Ph, 60 Hz, 56A.

Product Details

Used Lauda Integral XT 750

Inventory Number: 64435
Now (USD): $21,000.00

Lauda Integral XT 750 Process Thermostat -50°C to +220°C. The Integral XT process thermostats operate according to the fl ow principle with a cold oil blanket that allows the utilization of the entire temperature range through the use of a heat transfer medium. The electronically controlled, magnetically coupled pump can alter the pressure to adapt the flow rate to the relevant process requirements. The Integral XT models can be integrated easily in diff erent process control systems using a wide selection of interface modules. Technical Attributes Integral XT 750
Working temperature min.-50 °C
Working temperature max.220 °C
Ambient temperature min.5 °C
Ambient temperature max.40 °C
Temperature stability0.05 ±K
Applicationexternal
Filling volume min.5 L
Filling volume expansion vessel6.7 L
Heater power5.30 kW
Cooling output at 200°C measured with thermal oil7.00 kW
Cooling output at 150°C measured with thermal oil7.00 kW
Cooling output at 100°C measured with thermal oil7.00 kW
Cooling output at 50°C measured with thermal oil7.00 kW


Product Details

Used Neslab CFT 150

Inventory Number: 64259
Now (USD): $2,950.00

NESLAB CFT-150 Recirculating Chiller. Air Cooled Compressor. Analog control. Sealable fluid reservoir. PD-2 Pump 3.5 gpm at 50 psi. Temp. Range: +5°C  to +30°C. Cooling capacity 15345 btu/hr at 20°C. 208/230V, 1 Ph, 60 Hz, 13.7A

Product Details

Used Neslab CFT-33

Inventory Number: 64054
Now (USD): $1,350.00

Neslab CFT-33 Air Cooled Recirculating Chiller. Digital controller. Temp. Range: 15°C to 30°C. Cooling Capacity: 950W at 20°C 3240 btu/hr. PD-2 Pump: 3.5 gpm at 50 psi. Sealable reservoir. 220V, 1 Ph, 60 Hz, 8A. CE.

Product Details

Used Neslab HX 150AC

Inventory Number: 64315
Now (USD): $3,250.00

Neslab HX 150A/C Air Cooled Recirculating Chiller. TC400 Digital display. Temp. Range: 5°C to 35°C. Cooling Capacity: 15345 btu/hr at 20°C. CP-55 pump 10 gpm at 40 psi. 208-230V, 1 Ph, 60 Hz, 32A.

Product Details

Used Neslab HX-150A

Inventory Number: 64326
Now (USD): $3,250.00

Neslab HX 150A/C Air Cooled Recirculating Chiller. TC400 Digital display. Temp. Range: 5°C to 35°C. Cooling Capacity: 15345 btu/hr at 20°C. CP-55 pump 10 gpm at 40 psi. 208-230V, 1 Ph, 60 Hz, 32A.

Product Details

Used Neslab cft-150

Inventory Number: 64408
Now (USD): $3,250.00

NESLAB CFT-150 Recirculating Chiller. Air cooled compressor. Sealable reservoir. Digital readout. Temperature Range: +5°C to +30°C. Cooling Capacity: 15345 btu/hr at 20°C. PD-2 Pump: 3.5 gpm at 50 psi. Reservoir Volume: 5.0 gallons. 220V, 1 Ph, 60 Hz, 13.7A.

Product Details

Used Neslab ULT-80DD

Inventory Number: 64410
Now (USD): $4,500.00

NESLAB ULT-80DD Low Temperature Bath/Circulator. Digital temperature setpoint control. Temperature Range: -80°C to +10°C. Cooling Capacity: 1023 btu/hr at -70°C. Work Area: 5” L x 7” W x 9” D. Pumping: 0-13 l/m at O head. 208V, 1 Ph, 60 Hz, 18A

Product Details