Equipment Photos

Equipment Details

Inventory Number: 64920
Category: Miscellaneous
Manufacturer: Tousimis

TOUSIMIS Automegasamdri 815B Series C Large Capacity Fully Automatic Critical Point Dryer with Built In Refrigeration. Supercritical CPD MEMS dryer for wafers up to 4” dia. High efficiency internal closed loop refrigeration. 40% less LCO2 consumption. Microprocessor controller allows for complete automatic processing. 120V, 60 Hz, CE

Now (USD): $19,500.00

Products Similar to: Tousimis 815B Series C

Used Stanley Vidmar 4 Drawer Storage Cabinet

Inventory Number: 63960
Now (USD): $950.00

Stanley Vidmar 4 Drawer Industrial Storage Cabinet. Deep drawers. Overall cabinet dimensions: 28"L x 30"W x 60"H.

Product Details

Used FTS Systems Turbo Jet

Inventory Number: 64252
Now (USD): $3,950.00


 FTS Systems Turbo-Jet temperature forcing system. Temperature range: -70ºC to 230ºC.  Digital controller. Pneumatic arm raise/lower. 230V 1Ph 60Hz 28A  (plus compressed air)

Product Details

Used Ledco Signmaster 44

Inventory Number: 64366
Now (USD): $4,950.00

Ledco Signmaster 44 Hot Roll Laminator. The Signmaster 44 inch wide laminator has a heated roll for single side lamination.
The Signmaster combine all the tasks of a sign shop into one machine. Transfer tape application, vinyl application to sign blanks, mounting - over laminating using thermal mounting pouches, one side lamination using pressure sensitive films. Designed to provide quality lamination of a wide range of papers and materials up to ½ inch thick using film up to 10 mil thick. 110V, 50/60 Hz, 3A. Has optional Tension roll transducer.

Product Details

Used Ledco Signmaster 44

Inventory Number: 64365
Now (USD): $4,500.00

Ledco Signmaster 44 Hot Roll Laminator. The Signmaster 44 inch wide laminator has a heated roll for single side lamination. The Signmaster combine all the tasks of a sign shop into one machine. Transfer tape application, vinyl application to sign blanks, mounting - over laminating using thermal mounting pouches, one side lamination using pressure sensitive films. Designed to provide quality lamination of a wide range of papers and materials up to ½ inch thick using film up to 10 mil thick. 110V, 50/60 Hz, 3A.

Product Details

Used Shenzhen Oubel  OB-T02

Inventory Number: 64815
Now (USD): $4,500.00

Shenzhen Oubel OB-T02 Semi-Automatic SMD Taping Machine. Hot seal or self-adhesive taping. Mitsubishi PLC+7 inch touch screen controller. High precision vertical sealing, good sealing effect with the precision trimmer, trimming do +_ 0.01mm. Packing speed 3000 to 7000 pieces per hour. Packing width 8 to 72mm tape. 110V, 50/60Hz

Product Details

Used TMAXCN TMAX-TCH-DPA

Inventory Number: 64843
Now (USD): $3,250.00

TMAXCN TMAX-TCH-DPA Semi-Auto Battery Electrode Stacking Machine For Pouch Cell Electrodes.

  • Consistent tension controls for separator film delivery
  • "Z" fashion stacking with a separation via a foot-switch
  • Manual slidable fixtures enable accurate positioning and compactness of electrodes
  • Unreeling rotors for separator film feeding adjusting fixture position
  • Can accept various size of electrode

Product Details

Used Machine Control Specialists 100TX

Inventory Number: 64908
Now (USD): $15,000.00

Machine Control Specialists 100TX Tabletop Coil Winder.

Specifications

 

Machine

Model:

100TXM   100TXS 100TXHD

Max Wire Size:

18 Ga

12 Ga  14 Ga 

Max Coil Diameter:

5" 5" 5"
Output Shaft Diameter: 1/2" 1/2" 3/4"
Max Traverse Distance: 12 3/4" 12 3/4" 12 3/4"
Max Arbor Weigh w/ Coil: 3 Lbs 3 Lbs 15 Lbs
Min. Distance Between Centers: 8" 8" 8"
Max. Distance Between Centers: 18" 18" 18"
Motor Equipment: 1/2 HP DC .72HP Brushless .72HP Brushless
Motor RPM: 3500 5000 5000
Spindle Pulley Ratios:

1:2, 1:1, 2:1, 3:1, 4:1

Spindle Drive: Brushed Servo Brushless Servo Brushless Servo
Max Spindle Speed: 15000 RPM 15000 RPM 5000 RPM
Traverse Drive: Microstepper Brushless Servo Brushless Servo
Tailstock Quill Diameter: 5/8" 5/8" 1"
Tailstock Quill Travel: 1" 1" 1"
Tailstock Quill Tooling: 60 degree 60 degree 60 degree
Guard Operation: Manual Manual Manual
Line Power (115 VAC 50/60 HZ): 8 AMPS 8 AMPS 8 AMPS
Dimensions: 40" x 19" x 17" 40" x 19" x 17" 40" x 19" x 17"

 

 

   

 

 

Control Model MCS2

Control Type:

Embedded - Freescale 32 bit Processors

Display:

4 line x 40 Character Backlit LCD

Input Keypad:

24 Key (1/2" Rubber Tactile Touch)

Program Storage:

3500 lines / Complex and 10 Presets / Simple

I/O Points:

8 in / 8 out (24 VDC)

Programming Software:

MCSCOM for Windows XP/7/8 GUI

Interface:

RS232 for PC Interface

Product Details

Used STEER LabPlus 20

Inventory Number: 64980
Now (USD): $38,000.00

Steer LabPlus 20 Single Screw Extruder. Single screw laboratory extruder. Barrel Diameter 20. Screw Diameter 19.9 mm. Screw Minor Diameter11.3 mm. Screw functional length 28. Screw torque maximum 90 Nm. Barrel linear-moc Xaloy 8M 63/X200. Drive power 1.5kW. Maximum screw rotation 1415 rpm. Number of heating zones 3 zones plus Die adaptor plus Die head. Heating power 4.2kW. 230V, 3Ph, 60Hz

 

Product Details