Equipment Photos

Equipment Details

Inventory Number: 64151
Category: Material Test
Manufacturer: Wilson Rockwell

Wilson Rockwell 643-T Hardness Tester

Now (USD): $1,500.00

Products Similar to: Wilson Rockwell 643-T

Used BYK Gardner HAZE-GLOSS 4601

Inventory Number: 64281
Now (USD): $9,500.00

BYK Gardner HAZE-GLOSS 4601 Gloss Meter.

Features

  • 20, 60 and 85°: from high to low gloss - always the specified angle available
  • Reflection haze measurement for high gloss finishes
  • For any material: paint, plastic or even mirror-like metals
  • Reference beam, closed optics and self diagnosis ensure accurate quality control
  • Long-term calibration and menu guided operation - simple and secure
  • Foot switch and automatic measurement for fast sampling
  • Illuminated target facilitates sample positioning
  • Statistics with average, min/max and standard deviation

Product Details

Used BYK Gardner Micro-Gloss 20

Inventory Number: 64321
Now (USD): $1,950.00

BYK Gardner Micro-Gloss 20° Gloss Meter for High Gloss.

  • Single angle 20°, especially for high gloss surfaces
  • For any material: paint, plastic or even metals
  • Measuring area 10 x 10 mm
    • Intelligent gloss measurement with smart communication
    • Excellent repeatability and inter-instrument agreement guaranteed
    • Intelligent auto diagnosis guarantees always accurate readings
    • Brilliant color display easy to read - easy to use
    • Statistics, Pass/Fail and Memory - ideal for QC and checks in the field
    • Continuous mode to check uniformity over large areas
    • smart-chart software: instant QC reports with trend graph and Pass/Fail limits

Product Details

Used Atlas XENOTEST BETA+

Inventory Number: 64541
Now (USD): $21,500.00

Atlas XENOTEST BETA + Xenon Arc Weathering Testing System. The Xenotest Beta+ is a premium stand-alone rotating rack xenon instrument with 4000cm2 exposure area. It comes with a complete set of parameter controls. Irradiance and temperature are measured and controlled directly on the sample level using on-rack XENOSENSIV sensor technology. The Beta+ complies with the vast majority of industry standards. Due to its large test chamber and highly reliable performance, it‘s ideal for larger capacities or sample sizes.

          400 Volts, 3Phase, 50/60 Hertz

  • 3x 2200 W air-cooled Xenon Lamps
  • 4000 cm2 exposure area
  • High-irradiance testing up to 120 W/m2 (2 Sun)
  • Touch screen with colour display to monitor and display test parameters
  • Direct Setting and Control of Irradiance (300-400 nm)
  • Direct Setting and Control of Black Standard Temperature
  • Direct Setting and Control of Chamber Temperature
  • Direct Setting and Control of Relative Humidity
  • Display of Diagnostic Messages
  • Storage for 10 user-defined test methods
  • Pre-programmed international standard test methods
  • Multilingual User Interface
  • Non-aging XENOCHROME filters to simulate outdoor daylight, daylight behind window
  • On-rack XENOSENSIV 300-400 nm for measuring and controlling irradiance (in W/m2) and BST (°C) on sample level
  • Selectable temperature control either by Chamber Temperature (max. 70 °C) or by Dual Control: Chamber Temperature and Black Standard Temperature (up to 130 °C)
  • Fan-controlled temperature difference between Chamber and Black Standard Temperature
  • Ultrasonic humidification system for humidity control
  • Specimen spray system with integrated 60 l water reservoir

Product Details

Used Lake Shore Cryotronics 7407-S VSM

Inventory Number: 64939
Now (USD): $65,000.00

Lake Shore Cryotronics 7407-S Vibrating Sample Magnetometer. Lake Shore’s fully integrated vibrating sample magnetometers (VSMs) are used to characterize the DC magnetic properties of materials as a function of magnetic field, temperature, and time. Sensitive, low-noise floor electromagnet-based VSMs that feature a broad temperature range capability—4.2 K to 1,273 K (-269 °C to 1000 °C). These systems measure a wide range of sample types, making them ideal tools for the most demanding materials research applications as well as quality control of magnetic materials. Combines high sensitivity, precision electronics, flexible software, and variable magnetic field and temperature into the most advanced electromagnet-based VSM. Includes Lake Shore 74034 High Temperature oven enables the Model 7400 series VSM system to be used to investigate the magnetic properties of materials at high temperature. This option consists of an electrically heated outer tube assembly with efficient thermal insulation to permit sample-zone temperature from 100 °C to 1000 °C (373 K to 1273 K). Temperatures from 30 °C to 1000 °C  (303 K to 1273 K) are also possible, however, below 100 °C (373 K) measurement time increases. Also includes the Janis Research 74018A Variable Temperature Cryostat designed for rapid sample cooling with either LHe or LN2 as well as easy sample insertion and interchange. It allows you to take measurements from 5.5 K to 450 K using LHe and from 85 K to 450 K using LN2. A single-point measurement can be taken at 4.2 K (LHe) and at 77.6 K (LN2). The sample is suspended in a proprietary insulated tube constructed of nonmagnetic material.

7400-S Series VSM Specs    7404-S                     7407-S                        7410-S

  7404-S 7407-S 7410-S
Magnet pole cap face diameter 50 mm (2.0 in) 50 mm (2.0 in) 50 mm (2.0 in)
APPLIED FIELD STRENGTH (±1%)
Room temperature
3.5 mm (0.14 in) sample access
2.63 T 3.05 T 3.42 T
10 mm (0.4 in) sample access
2.27 T 2.72 T 3.16 T
16 mm (0.64 in) sample access
1.94 T 2.46 T 2.92 T
With oven or cryostat option
6.4 mm (0.25 in) sample access
1.49 T 2.12 T 2.59 T
With single-stage variable temperature option
6.4 mm (0.25 in) sample access
1.75 T 2.28 T 2.76 T
MOMENT MEASUREMENT
Noise floor (emu RMS)
Room temperature
 
0.1 TC; 0.1 s/pt
(no averaging)
450 nemu
0.1 TC; 1 s/pt 175 nemu
0.1 TC; 10 s/pt 60 nemu
With oven or cryostat option,
0.1 TC, 10 s/pt
2.5 µemu
With single stage variable
temperature option 0.1 TC, 10 s/pt
1.25 µemu
With vector option 0.1 TC, 10 s/pt 5 µemu
Dynamic range 1 × 10-7 to 103 emu
Time constants (TC) 0.1, 0.3, 1.0, 3.0, or 10.0 s
Moment stability1 Less than 0.05% RMS of full scale/day at constant field, constant temperature, and highest range after a 5 h warm-up period
Reproducibility Better than ±0.5%, or ±0.1% of full scale, fixed rotation angle and range, with sample replacement
Moment accuracy Better than 1% of reading ±0.2% of full scale with a geometrically identical test sample and calibrant
Sample mass 0 to 10 g (higher mass can be accommodated with decreased performance)
FIELD MEASUREMENT
Field accuracy 1% of reading or ±0.05% of full scale
Field resolution
2800 kA/m (35 kOe)
8 A/m (0.1 Oe)
280 kA/m (3.5 kOe) 0.8 A/m (0.01 Oe)
28 kA/m (350 Oe) 0.08 A/m (0.001 Oe)
Closed loop field control stability <0.05% RMS of full scale/h
MANUAL ROTATION
Setting resolution <1°
Setting reproducibility <1°
Rotation range 0 to 730°

Product Details

Used Morgan Press G100T

Inventory Number: 64978
Now (USD): $12,000.00

Morgan Press G-100T 20 Ton Injection Molding Press.

The Morgan-Press, Model G-100T, is an injection molder designed for practical and economical
manufacturing of thermoplastic parts in quantities required for prototyping and low-volume production.
It is primarily used for encapsulation, engineering prototypes, medical/dental devices, and marketing
samples. The Morgan-Press is an ideal molder because it is easy to change molds and materials to
make different parts. It is also capable of processing a full range of thermoplastic materials.
The Model G-100T Morgan-Press Injection Molder has the following specifications:
• 0 – 800 °F (0 – 430 °C) temperature control range
• 6 cu. in. (4 oz.) maximum single shot
• 20 ton maximum clamping force (toggle)
• 12,000 psi maximum injection pressure
• Utilities required:
o Electrical: 120 volts AC
o Compressed air: 200 psi (max.

Product Details