Used Buffalo Dental 200

Thermo Environmental Instruments Stack Probe Controller. Was used with a group of gas analyzers. 115V, 60 Hz.

Aremco Accu-Cut 5200 Ultra Hard Material Dicing Saw. Used to cut a wide range of ultra-hard materials such as ceramics, ferrites and quartz, as well as semiconductor materials including silicon, gallium arsenide and bismuth telluride. The Accu-Cut Model 5200 is a compact, semiautomatic system for laboratory and production applications on substrates up to 4 in. x 4 in. x 3/4 in. thick. It comes equipped with a 5,000 rpm fixed speed spindle, a manual indexing Y-stage and an air/oil in-feed for maintaining smooth, precise stage control. Parts are mounted with a pneumatic vise or vacuum manifold to a 360° theta stage for part alignment, and a monocular microscope.

Arbin Instruments BT-2000 Battery Tester. Channels: 1-4. High: +/-10A. Medium: +/- 1A. Voltage: 3-30V. Each channel is a true potentiostat and galvanostat which provides both voltage and current control for all charging and discharging requirements. The BT-2000 can handle both rechargeable and primary battery applications for all chemistries. Each test channel operates independently from the other enabling different test runs. 220V, 3 Ph, 50/60 Hz, 12A.

Shimadzu E1-2003M1 Turbopump Controller. Controller only, no cables.  5 Available.

Nikon Eclipse L200D Nomarski 8" Wafer Inspection Microscope with Camera and Measuring Software. Includes a Spot Insight 2 Megsample camera with capture and measuring software and pc. Microscope has top and bottom illumination, reflected and transmitted light. Trinocular compound microscope with optional camera adapter for dual viewing through 10X eyepieces and camera at the same time. Nomarsky prism/DIC analyzer & polarizer slider inserts. 6-place motorized objective turret with the following objectives: L PLAN 2.5X, LU PLAN FLUOR 5X, LU PLAN FLUOR 10X, LU PLAN FLUOR 20X, LU PLAN FLUOR 50X, LU PLAN FLUOR 100X. Brightfield/Darkfield illumination.C-mount camera port adapter. Coarse/fine focus controls on both sides.Focusing target to get you "close". 8x8 stage has 8"x8" travel. 100-120V 50/60Hz 2.4A

Temescal Ferrotec FC-2000 Ebeam Evaporator with Ion Gun Etch. The FC-2000 is a fast- cycle, load-locked system that allows the source to remain under vacuum during substrate reloading. The system is configured with a 6 pocket electron gun with a supersweep 64 sweep controller and the CV-6SLX 6KW E-gun power supply. The system also has a single resistive thermal deposition source. There is a 3-cm Ion source for etch or assisted deposition. Also includes the Inficon XTC/3S crystal deposition controller with dual crystal holder. System has a lift off dome for 4" wafers and variable speed substrate rotation.Standard source-to-substrate distance: 19.5″. The bell jar is 20" diameter. The Temescal Control System (TCS) provides fully integrated, recipe-driven process and vacuum control. Operating in any of three password-protected modes, the TCS also offers process variable monitoring, process and historical trend tracking, and process data logging. The TCS Automatic Mode. Auto mode operation provides fully automated execution of user-programmed recipes consisting of up to twenty process steps, as well as full abort diagnostics. The TCS Auto Mode also offers independent autopump and autovent operations, automated cryopump regeneration, and automated rate-of-rise testing. Manual Mode Operation. The TCS manual mode enables the user to set process parameters, operate major components and subsystems individually with full interlock protection, and execute nonautomated single-film deposition processes. Service Mode Operation. The TCS service mode provides noninterlocked low-level control over any of the system’s valves, pumps, motors, or power supplies. System Power 208V, 3Ph, 60Hz

Bohlin Instruments Gemini 200 Rheological Characterization System. Research grade rheometer optimized for both strain controlled and stress controlled operation. Proven Inductive motor technology powerful yet low inertia motor design enables adjustment of position or speed more rapidly than conventional motors with permanent magnets and optimum dynamic response necessary to perform transient and dynamic test protocols with excellent low torque response. Exceptional position and speed sensing. Torque Range: 0.05µNm to 200mNm in controlled stress and rate viscometry. 0.05µNm to 200mNm in controlled stress and strain oscillation. 110-220V, 50/60 Hz, 5/2A, CE. Does not include PC or software.

Labsphere LMS-200 Light Measurement Sphere. The LMS-200 is a 20 inch diameter integrating sphere mounted on a hinged frame designed for bench-top use. The hinged configuration allows the sphere to be easily opened and closed to change lamps or perform a measurement. The sphere is designed for measurement of miniature and small lamps with a maximum lamp wattage up to 400 watts.

Mbraun Glove Box Parts Unit. Not complete, missing antechamber and doors.

Karl Suss PA200 200 mm Wafer Prober with Laser Trimmer. Unit sold for parts. 200mm temperature controlled chuck without chiller or controller. Mitutoyo microscope with single objective. New Wave532 laser trimmer. Karl Suss Probeshield chuck enclosure. SOLD FOR PARTS.