Category Feed Subscribe to this Channel's RSS Feed


From thermal evaporators to high vacuum resistive evaporators, with various vapor deposition processes, knowing your evaporation systems are in excellent condition is important. When you need reliable evaporation, from carbon to metals, you need machinery you can trust - and that’s doubly true for second-hand equipment. You need to know your pre-owned refurbished evaporators aren’t going to let you down at a critical moment.

At Bid Service, we carry a wide range of on-site-refurbished second-hand evaporation chambers, systems and parts, including CHA evaporators and systems from the top manufacturers. Every used evaporator, part and system is fully tested, vetted and refurbished to our exacting standards. You can trust us to provide like-new, precisely recalibrated and, if necessary, updated evaporation equipment when you need it.

We endeavour to carry a full and comprehensive range of refurbished thermal and vacuum evaporation systems and more. As refurbishers and distributors of quality second-hand evaporators, our range can vary from time to time and we recommend browsing our site regularly, or getting in touch to find out if we’re carrying what you need.

We also buy used evaporators, so if you have any used equipment you wish to replace, or if you are moving, closing down a section of your operations, or need to sell a full operation, we will assess your second-hand equipment and make you an offer.

Used Bendix TME-2

Inventory Number: 60500
Now (USD): $17,500.00

High Vacuum Thermal Evaporator with Crystal Deposition Rate Monitor. Basic thermal deposition system. Manual operation, not automated. Two thermal sources, filament type. No substrate rotation. Diffusion pump with Welch roughing pump. Crystal deposition monitor. 17-inch dia. glass bell jar with implosion shield and motorized hoist.

Product Details

Used CHA SEC-1000-RAP

Inventory Number: 55643
Now (USD): $55,000.00

Dual Gun E Beam Evaporator. Used thin film deposition system. Two single pocket e-guns with individual power and sweep control. Inficon IC4 Plus deposition rate monitor. Temescal CV-8 E beam power supply. Auto-Tech II valve controller.  25.5 in. diameter water cooled stainless steel bell jar. CTI cryopump with compressor and roughing pump. Does not have substrate fixturing currently.

Product Details

Used CHA SEC-600-RAP

Inventory Number: 56242
Now (USD): $55,000.00

E-Beam Evaporator. Used thin film deposition system. High vacuum electron beam deposition system. 19 in. dia. water cooled bell jar. 6 pocket e-gun with SR-10 power supply and sweep controls. Inficon IC/4 crystal deposition monitor. CTI on board cryopump with compressor and roughing pump. Auto-Tech II vacuum controller. Fixture rotation controller and motor but does not include substrate fixturing. Heater power supply but no heaters currently installed.

Product Details

Used CHA SE-1000-RAP

Inventory Number: 56323
Now (USD): $55,000.00

Multisource E Beam and Thermal Evaporation System for Optical Films and Oxygen Reactive Evaporations. Used thin film deposition system. Inficon IC-4 Plus rate and deposition controller. Six pocket electron beam source with SR-10 E-Beam power supply. Parts for optical monitor with system but not tested or covered under warranty. Two outrigger style filament resistance sources with 6 kW SCR controlled power supply. Automatic valve sequence controller. 25 in. dia. x 30 in. tall water cooled bell jar. Pressure control system for oxygen reactive evaporations. VHS-10 high speed diffusion pump with roughing pump. Quartz substrate heaters. Slide type fixturing for lift off process. Does not use substrate rotation type fixturing.

Product Details

Used CHA Bell Jar

Inventory Number: 57144
Now (USD): $950.00

Stainless steel. 25.75 in. OD, 29 in. tall.

Product Details

Used CHA SE-1000

Inventory Number: 57367
Now (USD): $55,000.00

E-Beam Evaporator Deposition System. Used thin film deposition system. Electron beam high vacuum deposition system. Inficon IC4 crystal deposition rate monitor. Temescal CV-14 14 kW E-Beam power supply. Four pocket E-Gun. CTI cryopump with compressor and roughing pump. Quartz lamps for substrate heating. Automatic or manual vacuum valve sequencing. Water cooled stainless steel 25 in. dia. bell jar with hoist.

Product Details

Used CHA SE-600-RAP

Inventory Number: 57536
Now (USD): $45,000.00

Single Pocket E-Beam Evaporator. Used thin film deposition system. Inficon IC6000 crystal deposition monitor. Triple dome planetary for 3 in. wafers. Automatic or manual valve control. Diffusion pump and roughing pump. Motorized hoist. 19 in. dia. bell jar. Temescal CV-8 E-beam power supply with controls. Single pocket e-gun with shutter.

Product Details

Used CHA SE-600

Inventory Number: 57550
Now (USD): $49,500.00

High Vacuum E-Beam Evaporation System. Used thin film deposition system. PVD physical vapor deposition system. 19 in. dia. water cooled bell jar. Triple dome planetary fixturing currently configured for 3 in. dia. wafers. Inficon IC6000 crystal deposition rate monitor. Automatic valve sequencer. Four pocket E-gun with manual rotation control. Does not have auto pocket sequencer, manual only. Temescal CV-8 E-Beam power supply with controls. System uses a Varian VHS-6 diffusion pump for high vacuum. Roughing pump included.

Product Details

Used CHA SE-600-RAP

Inventory Number: 57558
Now (USD): $39,500.00

Multiple Thermal Evaporation Source High Vacuum Deposition System. Used thin film deposition system. Physical vapor deposition system. 19 in. dia. water cooled bell jar with hoist. Inficon crystal deposition rate monitor. System has four thermal sources for evaporation of different materials. Source is selected via push button on front panel. System has controls for substrate heaters but none are installed. No substrate fixturing with system but rotation motor and controller are installed. Automatic valve sequencer. System uses a Varian VHS-6 high speed diffusion pump for high vacuum. Includes vacuum pump. 208V, 3 Ph, 60 Hz.

Product Details

Used Davis & Wilder 35SC-5454

Inventory Number: 57693
Now (USD): $12,000.00

Very Large Box Coater. Inside Chamber Dimensions (at narrowest point): 54 in. W x 54 in. H x 40 in. D. Empty chamber, no pumps. Sold As Is.

Product Details