Used Polishing Jig Wafer Polishing Jig

Seiko Instruments OFL-11 Triple Platen Fiber Optic Polisher. 3 station optical fiber polisher. 100V, 50/60 Hz.

Logitech DH-300 Driven Head Precision Polishing System. Developed to address the issue of polishing times when processing semiconductor materials often describe as “hard” to polish within the industry. These systems have been designed for semi-automated final stage polishing of hard materials such as sapphire, silicon carbide (SiC)or gallium nitride (GaN). Features special polishing carrier head that applies high levels of down-force onto the samples, whilst rotational speed and direction are fully controllable. This results in the highest level of sample throughput of any of the Logitech systems.

• Manual Mode’ allows operators to control individual process parameters and variables such as rotational speed and direction of carrier heads via the Graphical User Interface (GUI).
• ‘Automatic Mode’ allows users to save and re-call multi-stage process recipes – making each process completely repeatable, even across different operators.

Spex 6850 Cryogenic Impact Mill. Uses steel impactor driven by magnetic coils. Requires liquid nitrogen as coolant. Coil will hold one 6801 vial or our
6751 vials. Digital controls. Liquid nitrogen consumption is typically 15 to 20 liters for initial cool down and filling of tub, 4 to 6 liters for each hour of operation there after. 115V, 1 Ph, 60 Hz, 15A

Senko APC 8000 Fiber Optic Polishing System. The APC-8000 features a superior fixture-to-platten locking mechanism and other design enhancements giving the user consistent polishing results at high production volumes. The fixture-to-platten locking mechanism confines motion to vertical plane, eliminating horizontal movement in the fixture that may cause damage to the fiber. 110V, 50/60Hz, 4A

Senko APC 8000 Fiber Optic Polishing System. The APC-8000 features a superior fixture-to-platten locking mechanism and other design enhancements giving the user consistent polishing results at high production volumes. The fixture-to-platten locking mechanism confines motion to vertical plane, eliminating horizontal movement in the fixture that may cause damage to the fiber. 110V, 50/60Hz, 4A

Buehler Metaserv 250 Polisher Grinder with Power Head. Easy to use control panel with quick access to power on/off, platen run/pause, digital up/down timer and reset, water on/off/run-active control, variable platen speed control from 50 to 500 rpm, and an emergency stop. Semiautomatic operation with the Vector® Power Head.  An easy to operate, economical power head with basic single sample operation, improves specimen consistency for low volume applications.  Pressure can be set individually for each of the 1-4 sample via mechanical loading. An analog pressure display and power switch are easily accessed on the front of the power head. 100-240V, 1 Ph, 50/60 Hz, 5A, CE