Equipment Photos

Equipment Details

Inventory Number: 63794
Category: Leak Detection
Manufacturer: Agilent

Agilent Varian VS Mobile Cart Helium Mass Spectrometer Leak Detector, Dry Scroll Pump, VSMD301,

The VS Series Leak Detectors combine the simplicity of two-button operation with advanced expert system intelligence. Fully automated start-up and calibration maximize productivity. Color touch screen has excellent clarity, even at wide angles. Intuitive menu structure is easy to navigate. Programmable test sequences improve testing efficiency. 120v, 50/60 hZ, ce

Now (USD): $15,000.00

Products Similar to: Agilent VSMD301

Used TM Electronics S1A-L1-MAX1

Inventory Number: 50611
Now (USD): $2,950.00

TM Electronics S1A-L1-MAX1 Problem Solving Leak and Flow Tester. System operates by pressurizing part and measuring pressure changes as low as .0001 psi. Currently set for very low flow rates less than 1 psi. Nondestructive, clean, dry tests. Touchscreen menu. Real time statistical analysis and quality control charts.

Product Details

Used Inficon Protec P3000

Inventory Number: 62307
Now (USD): $15,000.00

Inficon Protec P3000 Helium Sniffer Leak Detector. Protec P3000 provides the minimum detectable leak rate on the market. A small display in the ergonomically-designed probe handle shows the leak rate, so the operator can concentrate on the sniffing process and monitoring the leak rate at the same time. Built-in illumination source of the probe helps precisely position the sniffer tip. Multiple alarm functions make sure alarms cannot be overlooked. Built-in PRO-Check reference leak allows for easy and fast calibration at the production line at any time. I-Guide mode ensures your operator is testing the right locations with the correct technique. Leak rates can be displayed in refrigerant equivalents from a gas library. Automatic standby prevents intake of contaminants into the sniffer probe, thus saving filter and sensor life. 120V, 50/60 Hz, CE.

Product Details

Used Alcatel ASM-181TD

Inventory Number: 57522
Now (USD): $11,000.00


Measurement range 2 x 10-11 to 10-1 mbar.l/s
Electronic response time < 0.1 s
8 decade log recording output 1 V/dec.
Setpoint setting  
    Fine leak 10-11 to 10-2 mbar.l/s
    Gross leak 10-8 to 10-1 mbar.l/s
Inlet pressure display 103 to 10-3 mbar
Triode pressure display (Spectro) 10-5 to 10-3 mbar
Emission current display 0.2 to 2 mA
Cell sensitivity 3 x 10-4 A/mbar
He pumping speed at detector inlet port 4.4 l/s
Air pumping speed at spectrometer 110 l/s
He pumping speed at spectrometer 30 l/s
TMP exhaust pressure safety limit 6 mbar
Start-up time 3 min

view a video of the item working at this address

Product Details

Used Alcatel ASM 180TD+

Inventory Number: 63083
Now (USD): $10,000.00

ALCATEL ASM 180TD+ Compact High Sensitivity Dry Helium Leak Detector. Oil-less pumping system. Self contained unit for testing volumes up to 50 liters. Measurement range from 2 x 10-11 to 1.10-1 atm cc/s. Turbomolecular drag pump and diaphragm rough pump. 115V, 60 Hz, CE. LARGER VACUUM PUMP OPTION. Link to a quick video demonstration:

Product Details

Used Alcatel ASM 180TD

Inventory Number: 52996
Now (USD): $9,500.00

ALCATEL ASM-180TD Compact High Sensitivity Dry Helium Leak Detector. Stainless steel construction. Oil-less pumping system. Self contained unit for testing volumes up to 50 liters. Measurement range from 2 x 10-11 to 1.10-1 atm cc/s. Turbomolecular drag pump and diaphragm rough pump. 115V, 60 Hz, CE. Here is a link to a quick video demonstration.

Product Details

Used Adixen ASM 380

Inventory Number: 63792
Now (USD): $19,500.00

HIGH PERFORMANCE MOBILE HELIUM LEAK DETECTOR. Mobile unit optimized for rapid pump down and short response times on large test objects. ASM 380 high-performance leak detector is fitted with an ACP 40 dry backing pump combined with a powerful high vacuum pump. This makes it the ideal solution for maximum testing sensitivity in analytics, laboratories, the solar panel industry and the semiconductor industry. With the ASM 380, you will achieve extremely short pump down times even where large volumes are involved. Flange (in) DN 40 ISO-KF Test methods Vacuum and sniffing leak detection Detectable gases 4He, 3He, H2 Minimum detectable leak rate for He (sniffer leak detection) 1 · 10-8 Pa m3/s Minimum detectable leak rate for He (vacuum leak detection) 5 · 10-13 Pa m3/s Pumping speed for He 7 l/s Noise level 53 dB (A) Supply 90-240 V, 50/60 Hz Power consumption max. 1,500 W Power consumption 700 W Maximum inlet test pressure 15 hPa Start-up time (20 °C) without calibration < 4.5 min Start-up time (20 °C) with calibration < 5.5 min. Input voltage 115V to 240V 50/60 Hz. SEE VIDEO DEMONSTRATION OF THIS TOOL WORKING AT    2 UNITS AVAILABLE

Product Details

Used Agilent 8509B

Inventory Number: 54193
Now (USD): $3,499.00

Agilent 8509B Lightwave Polarization Analyzer. Wavelength operating range: 1200 nm to 1600 nm. Input power operating range: +10 dBm to -55 dBm. Input average power damage level: +16 dBm. Analyzer only in stock. 100/240V, 50/60 Hz, CE.

Product Details

Used Agilent 86142B 001,004,006

Inventory Number: 63869
Now (USD): $9,500.00

Agilent 86142B High performance benchtop Optical Spectrum Analyzer uses a patented double-pass monochromator design to simultaneously achieve high sensitivity and dynamic range with a fast sweep time. This is key for characterizing DWDM components and multiple channel systems, especially in a manufacturing environment where speed, accuracy, and throughput are critical. Specifications. Wavelength Range: 600 nm to 1700 nm. 9/125 um optical input. Wavelength Reproducibility <= 1 min: ±0.002 nm. Wavelength Span Range: 0.2 nm to full range and zero span. Wavelength Absolute Accuracy: ±0.5 nm. Wavelength Span Linearity: 1525 nm - 1570 nm, ±0.01 nm. Wavelength Span Linearity: for spans <40 nm, ±0.02 nm. Maximum Sensitivity (1250-1610 nm): –90 dBm. Maximum Sweep Rate: 40 nm/56.3 ms. Max Measurement Power: +15 dBm per channel, +30 dBm total. Dynamic Range: 70 dB. Resolution Bandwidth: 0.06 nm, 0.1 nm, 0.2 nm, 0.3 nm, 0.5 nm, 1 nm, 2 nm, 5 nm, 10 nm. OPTIONS 001,004 AND 006

Product Details

Used Agilent 8164B

Inventory Number: 63886
Now (USD): $6,500.00

AGILENT 8164B Lightwave Measurement System Mainframe. Supports a range of high-performance tunable laser modules, as well as all of the fixed source and sensor modules of the Agilent 8153A and Agilent 8163A/B Lightwave Multimeter series. Specifications. Trigger: True synchronous on all channels. Trigger Bandwidth: max. 100 kHz for triggering, and max. 1 MHz (50% duty cycle) for external digital modulation. GPIB Interface Performance: max. 300 kB/s (burst data rate during read of 12001 points from a power meter). Number of modules: 4 front-loadable Modules, 1 back-loadable Module. GPIB and RS-232C. Display: Graphic color display 640 × 480 pixels visible. VGA connector for external monitor.

Product Details

Used Agilent 81630B

Inventory Number: 63887
Now (USD): $1,950.00

AGILENT 81630B 970 to 1650 nm InGaAs Optical Power Sensor Module. Module is for use with Agilent 8163A/B Lightwave Multimeter, Agilent 8164A/B Lightwave Measurement System, and Agilent 8166A/B Lightwave Multichannel System. Specifications. Wavelength Range: 970 nm to 1650 nm. Power Range: +28 dBm to -70 dBm. Uncertainty (accuracy) at reference conditions: ±3% (1255 nm to 1630 nm). Linearity (power) at 23°C ±5°C: CW +28 dBm to -50 dBm (970 to 1630 nm) =±0.05 dB ± 1.2 nW. Return loss: >55 dB. Noise (peak to peak): <1.2 nW. Averaging time (minimal): 100 µs. Power Sensor Type: (InGaAs).

Product Details