Equipment Photos

Equipment Details

Inventory Number: 47992
Category: Leak Detection
Manufacturer: Veeco

Veeco MS 30T Turbopumped Leak Detector. Full color screen simple operation. 1 Button start-up. Fine and gross leak testing. Automatic tuning and calibration. Leak Range: 10 atm cc/sec to 6 x 10^-11 atm cc/sec. 110V, 60 Hz, 25A. SOLD AS IS FOR PARTS

Now (USD): $1,500.00

Products Similar to: Veeco MS 30T

Used TM Electronics S1A-L1-MAX1

Inventory Number: 50611
Now (USD): $2,950.00

TM Electronics S1A-L1-MAX1 Problem Solving Leak and Flow Tester. System operates by pressurizing part and measuring pressure changes as low as .0001 psi. Currently set for very low flow rates less than 1 psi. Nondestructive, clean, dry tests. Touchscreen menu. Real time statistical analysis and quality control charts.

Product Details

Used Inficon Protec P3000

Inventory Number: 62307
Now (USD): $15,000.00

Inficon Protec P3000 Helium Sniffer Leak Detector. Protec P3000 provides the minimum detectable leak rate on the market. A small display in the ergonomically-designed probe handle shows the leak rate, so the operator can concentrate on the sniffing process and monitoring the leak rate at the same time. Built-in illumination source of the probe helps precisely position the sniffer tip. Multiple alarm functions make sure alarms cannot be overlooked. Built-in PRO-Check reference leak allows for easy and fast calibration at the production line at any time. I-Guide mode ensures your operator is testing the right locations with the correct technique. Leak rates can be displayed in refrigerant equivalents from a gas library. Automatic standby prevents intake of contaminants into the sniffer probe, thus saving filter and sensor life. 120V, 50/60 Hz, CE.

Product Details

Used Alcatel ASM-181TD

Inventory Number: 57522
Now (USD): $11,000.00

OIL FREE DRY HELIUM LEAK DETECTOR

Measurement range 2 x 10-11 to 10-1 mbar.l/s
Electronic response time < 0.1 s
8 decade log recording output 1 V/dec.
Setpoint setting  
    Fine leak 10-11 to 10-2 mbar.l/s
    Gross leak 10-8 to 10-1 mbar.l/s
Inlet pressure display 103 to 10-3 mbar
Triode pressure display (Spectro) 10-5 to 10-3 mbar
Emission current display 0.2 to 2 mA
Cell sensitivity 3 x 10-4 A/mbar
He pumping speed at detector inlet port 4.4 l/s
Air pumping speed at spectrometer 110 l/s
He pumping speed at spectrometer 30 l/s
TMP exhaust pressure safety limit 6 mbar
Start-up time 3 min

view a video of the item working at this address 

https://youtu.be/zVTQ1jPy3zc

Product Details

Used Alcatel ASM 180TD+

Inventory Number: 63083
Now (USD): $10,000.00

ALCATEL ASM 180TD+ Compact High Sensitivity Dry Helium Leak Detector. Oil-less pumping system. Self contained unit for testing volumes up to 50 liters. Measurement range from 2 x 10-11 to 1.10-1 atm cc/s. Turbomolecular drag pump and diaphragm rough pump. 115V, 60 Hz, CE. LARGER VACUUM PUMP OPTION. Link to a quick video demonstration: 

https://youtu.be/ykaf9aMCC9Q

Product Details

Used Alcatel ASM 180TD

Inventory Number: 52996
Now (USD): $9,500.00

ALCATEL ASM-180TD Compact High Sensitivity Dry Helium Leak Detector. Stainless steel construction. Oil-less pumping system. Self contained unit for testing volumes up to 50 liters. Measurement range from 2 x 10-11 to 1.10-1 atm cc/s. Turbomolecular drag pump and diaphragm rough pump. 115V, 60 Hz, CE. Here is a link to a quick video demonstration. 

https://youtu.be/fX7m4QPXRSk

Product Details

Used Adixen ASM 340

Inventory Number: 63784
Now (USD): $13,950.00

ADIXEN ASM 340 HELIUM LEAK DETECTOR. "LIKE NEW ONLY 235 HOURS".Powerful rotary vane pump with 15 m3/h backing pump capacity. 2.5 l/s helium pumping speed.110/130 V operating voltage, US power cable. Customizable and detachable operator interface.Integrated SD card for data processing. Easy operation, intuitive menu and large color touch screen. Various languages and operating voltages available for global use. 100V to 130V, 50/60Hz, CE

Product Details

Used Adixen ASM 380

Inventory Number: 63792
Now (USD): $19,500.00

HIGH PERFORMANCE MOBILE HELIUM LEAK DETECTOR. Mobile unit optimized for rapid pump down and short response times on large test objects. ASM 380 high-performance leak detector is fitted with an ACP 40 dry backing pump combined with a powerful high vacuum pump. This makes it the ideal solution for maximum testing sensitivity in analytics, laboratories, the solar panel industry and the semiconductor industry. With the ASM 380, you will achieve extremely short pump down times even where large volumes are involved. Flange (in) DN 40 ISO-KF Test methods Vacuum and sniffing leak detection Detectable gases 4He, 3He, H2 Minimum detectable leak rate for He (sniffer leak detection) 1 · 10-8 Pa m3/s Minimum detectable leak rate for He (vacuum leak detection) 5 · 10-13 Pa m3/s Pumping speed for He 7 l/s Noise level 53 dB (A) Supply 90-240 V, 50/60 Hz Power consumption max. 1,500 W Power consumption 700 W Maximum inlet test pressure 15 hPa Start-up time (20 °C) without calibration < 4.5 min Start-up time (20 °C) with calibration < 5.5 min. Input voltage 115V to 240V 50/60 Hz. SEE VIDEO DEMONSTRATION OF THIS TOOL WORKING AT 

https://youtu.be/5frw4sO5424

Product Details

Used Agilent VSMD301

Inventory Number: 63794
Now (USD): $15,000.00

Agilent Varian VS Mobile Cart Helium Mass Spectrometer Leak Detector, Dry Scroll Pump, VSMD301,

The VS Series Leak Detectors combine the simplicity of two-button operation with advanced expert system intelligence. Fully automated start-up and calibration maximize productivity. Color touch screen has excellent clarity, even at wide angles. Intuitive menu structure is easy to navigate. Programmable test sequences improve testing efficiency. 120v, 50/60 hZ, ce

Product Details

Used Adixen ASM 380

Inventory Number: 63800
Now (USD): $19,500.00

HIGH PERFORMANCE MOBILE HELIUM LEAK DETECTOR. Mobile unit optimized for rapid pump down and short response times on large test objects. ASM 380 high-performance leak detector is fitted with an ACP 40 dry backing pump combined with a powerful high vacuum pump. This makes it the ideal solution for maximum testing sensitivity in analytics, laboratories, the solar panel industry and the semiconductor industry. With the ASM 380, you will achieve extremely short pump down times even where large volumes are involved. Flange (in) DN 40 ISO-KF Test methods Vacuum and sniffing leak detection Detectable gases 4He, 3He, H2 Minimum detectable leak rate for He (sniffer leak detection) 1 · 10-8 Pa m3/s Minimum detectable leak rate for He (vacuum leak detection) 5 · 10-13 Pa m3/s Pumping speed for He 7 l/s Noise level 53 dB (A) Supply 90-240 V, 50/60 Hz Power consumption max. 1,500 W Power consumption 700 W Maximum inlet test pressure 15 hPa Start-up time (20 °C) without calibration < 4.5 min Start-up time (20 °C) with calibration < 5.5 min. Input voltage 115V to 240V 50/60 Hz. SEE VIDEO DEMONSTRATION OF THIS TOOL WORKING AT

https://youtu.be/7gVpY-PZwXU


Product Details