Used Allied High Tech Tech Cut

Aremco Accu-Cut 5200 Ultra Hard Material Dicing Saw. Used to cut a wide range of ultra-hard materials such as ceramics, ferrites and quartz, as well as semiconductor materials including silicon, gallium arsenide and bismuth telluride. The Accu-Cut Model 5200 is a compact, semiautomatic system for laboratory and production applications on substrates up to 4 in. x 4 in. x 3/4 in. thick. It comes equipped with a 5,000 rpm fixed speed spindle, a manual indexing Y-stage and an air/oil in-feed for maintaining smooth, precise stage control. Parts are mounted with a pneumatic vise or vacuum manifold to a 360° theta stage for part alignment, and a monocular microscope.

Ultron UH115 Semiautomatic Wafer Frame Film Mounter. The Model UH115 features a semiautomatic one-pass lamination which provides an extra margin of safety when mounting particularly fragile wafers/substrates. Bubble free film lamination. Static Ionization Bar with power safety interlock. Does not come with Take-up roller assembly option. Edge-Contact Workstage for 6" wafers. 115V, 1PH, 50/60Hz, 3A

K&S 961 Wafer Tape Frame Mounter. The K&S Model 961 Wafer Mounting Station enables the mounting of wafers up to 8 inches in diameter. This mounting station is compatible with standard or interleaved UV-curable tape, and contains a vacuum stage wafer hold-down for holding the wafer in position during mounting. A programmable heating stage heats the tape to attain uniform tensioning, the adjustable spring loaded plate ensures optimal contact pressure and a built-in tape cutter facilitates mounted piece extraction. Includes optional static eliminator and tape backing removal assembly. 110V, 50/60Hz, 5A

Scifab Series 1000 Deluxe Hard Tissue Microtome.

Disco DAD-2H/6TM Precision Dicing Saw. Can select round or square cut configurations when dicing wafers up to 6” in automatic or manual modes.
Fully programmable. High frequency air spindle variable speed from 10,000 to 40,000 rpm. 360° motor controlled theta  rotation. High precision camera and monitor for easy alignment. OLDER DICING SAW BUT SOLD TESTED AND WORKING!

Buehler Oscillamet Metallurgical Wet Type Abrasive Sample Cut-Off Saw. Cutting Wheel Diameter:12". Cutting Wheel Speed (RPM):4,500. Sectioning Capacity:12½" Deep or 3.75" x 4"H. 230V, 3Ph, 60Hz, 17A

ULTRON UH114-8 Wafer/Frame Film Applicator. Uniform bubble-free adhesion. Temperature controlled wafer stage. Operates with backed or non-backed films. Wafer chuck for up to 8” dia. wafers. 115V, 50/60 Hz, 3A

Allied High Tech Techprep Semiautomatic Sample Polisher with Multiprep Oscillating Head. Platen rotation speeds from 5 to 350 rpm in either clockwise or counter clockwise direction. Program speed, timer, oscillation and rotation settings.  Platen: 8” dia. 115V, 50/60 Hz, 3.3A