Equipment Photos

Equipment Details

Inventory Number: 58038
Category: Cleaning Systems
Manufacturer: Sono-Tek Cleaning Systems

Ultrasonic IPA Degreasing, Cleaning and Drying System. Used to degrease, clean and dry printed circuit board and hybrid assemblies using isopropyl alcohol as the cleaning solvent. Fully automatic PLC controller and can be set up to perform a variety of multiple step processes. Includes ultrasonic agitation option and spray option. Tank Size Below Cooling Coils: 20.5 in. L x 11.5 in. W x 17 in. D. 208V, 3 Ph, 50/60 Hz.

Now (USD): $15,000.00

Products Similar to: Sono-Tek Cleaning Systems IG-200 PCB

Used Branson MU 2112-40-24S

Inventory Number: 43793
Now (USD): $650.00

Ultrasonic Tank. Tank only, no controller. 24 element 40 kHz. Inside Dimensions: 21 in. L x 12 in. W x 14 in. H.

Product Details

Used Semitool STI PA72-40MB-0603

Inventory Number: 44013
Now (USD): $950.00

Semitool 4 in. Single Bolt Rotor.

Product Details

Used Global Processing MASP TTTT

Inventory Number: 46882
Now (USD): $8,500.00

4 Inlet Thermal Oxide Scrubber.

Product Details

Used EDC 100

Inventory Number: 51023
Now (USD): $2,500.00

Exclusive Design Co. Rigid Disk Cleaning System. Uses brushes and surfactant to scrub disks. LCD display. Analog control of scrub/rinse speed and spin dry speed. 115V, 60 Hz.

Product Details

Used Accu-Fab Systems ECO-SNOW

Inventory Number: 52338
Now (USD): $25,000.00

CO2 Precision Surface Cleaning System. For removing micron and submicron particulate and organic contamination using carbon dioxide. When aimed at a contaminated surface the CO2 snow particles dislodge particles and remove thin film organic residues. Removing post-etch veils by momentum transfer or metal lift-off by thermal contraction and momentum transfer. Removes organic film by solvation. Cassette to cassette operation.

Product Details

Used Yieldup Omega 6200

Inventory Number: 52683
Now (USD): $29,000.00

Megasonic Wafer Cleaning System. Robot assist between 2 tanks. Set up for 2 - 200 mm cassettes. Tank 1: 11 in. L x 20 in. W x 15 in. H is a quartz megasonic tank with 3 - 600W KAJO megasonic generators. Tank 2: 12 in. L x 20 in. W x 14 in. H is a YieldUp dryer tank with N2 purge and gas injection capability. Overall Dimensions: 60 in. L x 60 in. W x 88 in. H. Mfg. Date: 12/97.

Product Details

Used Fluidix SX-60

Inventory Number: 52741
Now (USD): $950.00

High Speed Water Heater. Digital controller with audible alarms. Max. Pressure: 75 psi. 480V, 3 Ph, 60 Hz, 73A. Previously used on ultrasonic cleaning line.

Product Details

Used Crest Ultrasonics OC4-1218-HE

Inventory Number: 54438
Now (USD): $14,500.00

Ultrasonic Cleaning Line. Unit has rotation mechanisms on each of the tanks that spin cages that hold parts to be cleaned. Parts Carrier Inside Dimensions: 5-3/8 in. x 5-3/8 in. x 12 in. System can also be used as a standard unit without these carriers. 3 Heated Ultrasonic Baths: 12 L x 18 in. W x 10 in. H. Hot Air Dryer: 12 in. L x 18 in. W x 10 in. H. 480V, 3 Ph, 50/60 Hz, 31A.

Product Details

Used K&S 973

Inventory Number: 54710
Now (USD): $9,500.00

High Pressure Microwash Substrate Cleaning System. For sawed/scribed wafers or photomask cleaning. Utilizes an oscillating high pressure deionized water jet spray of up to 2000 psi with 0.2 micron filtration. Handles wafers up to 8 in. dia. depending on type of chuck installed. Touch screen operation. CO2 reionizer for elimination of static charge. Nitrogen dry. Infrared heat lamp. 115V, 50/60 Hz, 6A.

Product Details

Used K&S 973

Inventory Number: 54734
Now (USD): $9,500.00

High Pressure Microwash Substrate Cleaning System. For sawed/scribed wafers or photomask cleaning. Utilizes an oscillating high pressure deionized water jet spray of up to 2000 psi with 0.2 micron filtration. Handles wafers up to 8 in. dia. depending on type of chuck installed. Touch screen operation. CO2 reionizer for elimination of static charge. Nitrogen dry. Infrared heat lamp. 115V, 50/60 Hz, 6A.

Product Details