Equipment Photos

Equipment Details

Inventory Number: 64086
Category: Dicing Saws-Scribers
Manufacturer: Buehler

SAMPLMET® 2 Abrasive Cutter, complete bench top unit with recirculating coolant system, includes totally enclosed cutter with 1 HP (735W) motor, 3400 RPM no load speed, 1¼′′ (32mm) diameter solid bar cutting capacity, ′′ (38mm) vise capacity, light alloy base casting, molded glass-reinforced-plastic-hood, left-hand cam activated vise, operator controls. 110V, 60Hz, 15A

Now (USD): $4,250.00

Products Similar to: Buehler SAMPLMET 2

Used Aremco Accu-Cut 5200

Inventory Number: 61730
Now (USD): $6,500.00

Aremco Accu-Cut 5200 Ultra Hard Material Dicing Saw. Used to cut a wide range of ultra-hard materials such as ceramics, ferrites and quartz, as well as semiconductor materials including silicon, gallium arsenide and bismuth telluride. The Accu-Cut Model 5200 is a compact, semiautomatic system for laboratory and production applications on substrates up to 4 in. x 4 in. x 3/4 in. thick. It comes equipped with a 5,000 rpm fixed speed spindle, a manual indexing Y-stage and an air/oil in-feed for maintaining smooth, precise stage control. Parts are mounted with a pneumatic vise or vacuum manifold to a 360° theta stage for part alignment, and a monocular microscope.

Product Details

Used Lintec RAD-2500F/8

Inventory Number: 62399
Now (USD): $49,000.00

Lintec RAD-2500F/8 Fully Automatic Wafer Tape Frame Mounter. Consists of alignment function and tape tension control system which reduces voids at lamination. Currently configured for 200mm wafer size. 8-inch frame table (DTF2-8-1 Disco). Ring frame, heater spec. 6-inch VN wafer and 6-inch wafer cassette compliance. Protrusion sensor. 200-230V, 1 Ph, 50/60 Hz, 8A. Date of Mfg.: 2011.

Product Details

Used Leco PR-35

Inventory Number: 56580
Now (USD): $3,950.00

Leco PR-35 Automatic Dual Mount Dual Mold Pneumatic Sample Mounting Press. Two sample mounting presses in one package. Mold diameter: 2 in. Thermostatically controlled heater with integral water cooler. Direct reading pressure gauge. Additional 1-1/4 in. heater molding head. 230V, 1 Ph, 50/60 Hz, 11A.

Product Details

Used Buehler Ecomet 3

Inventory Number: 62652
Now (USD): $2,500.00

Buehler Ecomet 3 Variable Speed Grinder Polisher. Polishing Wheel: 8 in. Variable Speed: 50 to 500 rpm. LED display. Constant wheel speed maintained under all load conditions. 110-115V, 1 Ph, 50/60 Hz, 15A.

Product Details

Used Buehler SIMPLIMET

Inventory Number: 64092
Now (USD): $1,950.00

Buehler SIMPLIMET Sample Mounting Press is a manual hydraulic press for economical mounting of low to medium volume requirements. A thermostatically controlled heater and slip on mold cooler complement this compact unit. Has small crack in the back of cover but this does not effect function.

Product Details

Used Buehler Ecomet 3 Automet 2

Inventory Number: 64161
Now (USD): $4,250.00

Buehler Ecomet 3 Polisher Grinder with Automet 2 Power Head. Variable speed grinder polisher with 8” wheel. Constant wheel speed maintained under load conditions. Automet 2 power head for high volume sample preparation. Does not come with sample holder. 115V, 50/60 Hz, 15A.

Product Details