Equipment Photos

Equipment Details

Inventory Number: 62331
Category: Probers
Manufacturer: Cascade Microtech

Microwave Probe Station. The RF-1 combines precision movement and stability with high value microwave probing features and accommodates the full range of Cascade’s microwave probing tools. Features: Compact benchtop design, precision 150mm (6 in.) x-y stage, 1-inch adjustable z-chuck height, 150mm (6 in.) microwave chuck. Patented auxiliary chucks for calibration substrates. Switch selectable vacuum zones, 1-inch coaxial x-y microscope transport with safety lock. High rigidity microwave platen with precision linear lift. Accommodates up to four microwave positioners. X-Y stage travel 152 x 152mm (6 in. x 6 in.). Microwave wafer chuck size 152mm (6 in.) semi-square with two integrated auxiliary chucks.

Now (USD): $15,000.00

Products Similar to: Cascade Microtech RF-1

Used RF Plasma Products RF-10

Inventory Number: 54225
Now (USD): $2,950.00

Air Cooled 1000W 13.56 MHz RF Generator. Power Output: 1000W. Frequency: 13.56 MHz. 208V, 1 Ph, 50/60 Hz.

Product Details

Used Cascade Microtech RF-1

Inventory Number: 62839
Now (USD): $15,000.00

Precision Manual Microwave Prober. The RF-1 combines precision movement and stability with microwave probing features. Precision 150mm (6 in.) X-Y stage. 1-inch adjustable Z-chuck height. 150mm microwave chuck holds impedance standard substrates and wafer at the same time to allow quick calibrate and measure steps. Switch selectable vacuum zones. High rigidity microwave platen with precision linear lift. Fast, precise movement between test sties with orthogonal X-Y stage translation and linear Z lift.

Product Details

Used Wentworth 034-4002

Inventory Number: 48801
Now (USD): $450.00

Probe Contact Box.

Product Details

Used Integrated Technology Corp. PB500A

Inventory Number: 50143
Now (USD): $6,500.00

Probe Card Repair and Analysis Station. Computer controlled system fully tests and exercise the probe card and allows complete statistical monitoring of probe card performance. Planarization, current leakage and resistance testing. Full database kept on each probe card for statistical process control.

Product Details

Used Cascade Microtech FPD-100

Inventory Number: 56790
Now (USD): $250.00

Vacuum Based Dual Probe Holder. These tools are for mounting two of the Cascade DCM 200 manipulators together on vacuum base for easy mounting and removal. $250 each.

Product Details

Used Signatone CM400

Inventory Number: 58293
Now (USD): $1,500.00

Automated Analytical Probe Station. Not complete, sold as is for parts.

Product Details

Used Wentworth MP-2000

Inventory Number: 58353
Now (USD): $2,950.00

200mm Programmable Analytical Prober. Being sold AS IS since we do not have the computer or software to test this. Was able to check theta rotation, platform up and down and microscope up and down. No microscope with system. 8 in. dia. vacuum chuck.

Product Details

Used MPI LEDA-8F 3G Plus-V 110

Inventory Number: 58957
Now (USD): $17,500.00

3G Plus-V is a wafer prober for testing diced die on stretch frame (dies on blue tape mounted on a tape ring). Wafers cut, broken by scribing, laser etc. and then expanded on stretch frame. May be tested to determine if any secondary operations have damaged the product. The maximum test area for the system is 6 inches of active die area or smaller. Machine Features: 3G Plus-V provides the functions of die position information saving, auto-probing, testing etc. It contains these advantages: * Automatic diced wafer alignment. * Rapid pre-scan provides fast die position information speeding test and increasing throughput. Probe station for testing LED light emitting diodes. Compact rigid and reliable semiautomatic chip probing system. PC controller. 5 in. dia. vacuum chuck. Four precision probe manipulators. StereoZoom microscope. WEI Industries Co. Ltd model LED-632HC LED tester. This controller tested for power only, not LED testing. 110V, 50/60 Hz.

Product Details

Used Wentworth 0-001-1096

Inventory Number: 48735
Now (USD): $950.00

Vacuum Base Probe Manipulator. Micrometer on X-Y axis.

Product Details

Used TMC Table and Dark Box

Inventory Number: 59481
Now (USD): $2,950.00

Vibration isolation table with dark box. Table Dimensions: 44 in. L x 33 in. W x 32 in. H. Box Outside Dimensions: 48 in. L x 37 in. W x 36 in. H. Pneumatic isolation legs.

Product Details