Bid Service, LLC 225 Willow Brook Rd. Freehold, NJ 07728
Phone: 732-863-9500 Fax: 732-863-1255
Travel Arrangements Google Maps
Vimeo HD Equipment Videos
Bid Service YouTube Channel
Exclusive Design Co. Rigid Disk Cleaning System. Uses brushes and surfactant to scrub disks. LCD display. Analog control of scrub/rinse speed and spin dry speed. 115V, 60 Hz.
Programmable Reflow Solder Power Supply. LCD display. Step by step programming instructions. 115V, 50/60 Hz, 8A.
Liquid Dispensing System. Easily programmed. Fully automatic. Vision camera. Automatic part handling-conveyer. MC3 motion control computer. Dispense Area: 18 in. x 18 in. 110V, 50/60 Hz, 30A.
Aerosol Particle Counting System. PC controller. Size Range: 0.1 to 2.0 micrometers. Flow Rate: 0.01 cfm. Automatic processing of up to 99 data samples, stores up to 1470 samples in a time series plot. 115V, 60 Hz.
Continuous Toxic Gas Monitor. User programmable dual level alarms. Output: 4 -20 mA. Built in thermal printer. 115V, 60 Hz.
Heated Quartz Bath. No controller, bath only. Inside Dimensions: 11 in. L x 7 in. W x 8 in. H. No drain. 208V, 1 Ph, 50/60 Hz, CE. Never Used.
Precision Wafer Dicing Saw. Monitor and control dicing stability via immediate feedback of blade load for greater precision and yield. Up to 200mm x 200mm work area, 6 in. dia. porous vacuum chuck currently installed. Z Axis Travel: 50mm. Blade Capacity: 2 in. to 3 in. Spindle speed programmable up to 60,000 rpm. 200/240V, 1 Ph, 50/60 Hz, 15A.
Dual Gun E Beam Evaporator. Used thin film deposition system. Two single pocket e-guns with individual power and sweep control. Inficon IC4 Plus deposition rate monitor. Temescal CV-8 E beam power supply. Auto-Tech II valve controller. 25.5 in. diameter water cooled stainless steel bell jar. CTI cryopump with compressor and roughing pump. Does not have substrate fixturing currently.
Multisource E Beam and Thermal Evaporation System for Optical Films and Oxygen Reactive Evaporations. Used thin film deposition system. Inficon IC-4 Plus rate and deposition controller. Six pocket electron beam source with SR-10 E-Beam power supply. Parts for optical monitor with system but not tested or covered under warranty. Two outrigger style filament resistance sources with 6 kW SCR controlled power supply. Automatic valve sequence controller. 25 in. dia. x 30 in. tall water cooled bell jar. Pressure control system for oxygen reactive evaporations. VHS-10 high speed diffusion pump with roughing pump. Quartz substrate heaters. Slide type fixturing for lift off process. Does not use substrate rotation type fixturing.
E-Beam Evaporator Deposition System. Used thin film deposition system. Electron beam high vacuum deposition system. Inficon IC4 crystal deposition rate monitor. Temescal CV-14 14 kW E-Beam power supply. Four pocket E-Gun. CTI cryopump with compressor and roughing pump. Quartz lamps for substrate heating. Automatic or manual vacuum valve sequencing. Water cooled stainless steel 25 in. dia. bell jar with hoist.
Flexicure UV Adhesive Curing System. Developed to accelerate the curing process of UV adhesives for component bonding, sealing and protection. 2 outputs but only 1 flexible cable.