Equipment Photos

Equipment Details

Inventory Number: 62041
Category: Cleaning Systems
Manufacturer: Crest Ultrasonics

Crest Ultrasonics Custom Ultrasonic Cleaning Line. Configured with two heated ultrasonic tanks and one spray rinse tank. Tank Dimensions: 12 in. L x 18 in. W x 10 in. D. Unit is scratched, was cleaned with a wire wheel or sander. 208V, 3 Ph, 50/60 Hz, 40A.

Now (USD): $8,500.00

Products Similar to: Crest Ultrasonics Custom

Used Crest Ultrasonics Custom Ultrasonic Cleaner

Inventory Number: 59715
Now (USD): $11,000.00

Crest Ultrasonics Custom In-Line Ultrasonic Cleaning System. Three heated Ultrasonic Cleaning Tanks: 12 in. L x 18 in. W x 10.5 in. H. Each has two ultrasonic generators. Stainless steel construction. 208V, 3 Ph, 50/60 Hz, 60A.

Product Details

Used EDC 100

Inventory Number: 51023
Now (USD): $2,500.00

EDC 100 Exclusive Design Co. Rigid Disk Cleaning System. Uses brushes and surfactant to scrub disks. LCD display. Analog control of scrub/rinse speed and spin dry speed. 115V, 60 Hz.

Product Details

Used Yieldup Omega 6200

Inventory Number: 52683
Now (USD): $21,000.00

Yieldup Omega 6200 Megasonic Wafer Cleaning System. Robot assist between 2 tanks. Set up for 2 - 200 mm cassettes. Tank 1: 11 in. L x 20 in. W x 15 in. H is a quartz megasonic tank with 3 - 600W KAJO megasonic generators. Tank 2: 12 in. L x 20 in. W x 14 in. H is a YieldUp dryer tank with N2 purge and gas injection capability. Overall Dimensions: 60 in. L x 60 in. W x 88 in. H. Mfg. Date: 12/97.

Product Details

Used Verteq GFM-CMP-200M-G2L-E0

Inventory Number: 58154
Now (USD): $21,000.00

Verteq GFM-CMP-200M-G2L-E0 Goldfinger Megasonic Single Wafer Cleaning System. Megasonic sound waves are used to scrub surfaces clean of particles and contamination. System is controlled and operated using a LCD handheld pendant. System removes residue from advanced semiconductor devices with design rules below 130nm without damaging gate stacks, bit lines or vulnerable thin films. Comes with wafer holder for 4 in., 6 in. and 8 in. wafers. Manual loading. 120V, 50/60 Hz, 21A.

Product Details

Used Crest Ultrasonics OC3-1014-HE

Inventory Number: 59654
Now (USD): $19,500.00

Crest Ultrasonics OC3-1014-HE Three Station Ultrasonic Cleaning System.  Station 1 - Heated Ultrasonic Immersion Wash Tank Size: 10 in. L x 14 in. W x 7 in. D.  Station 2 - Heated Ultrasonic Spray Over Immersion Rinse Tank Size: 10 in. L x 14 in. W x 7 in. D.  Station 3 - Recirculating Hot Air Dryer Size: 10 in. L x 16 in. W x 8 in. H. 240V, 3 Ph, 50/60 Hz, 33.8A.

Product Details

Used Crest Ultrasonics Custom Ultrasonic Cleaner

Inventory Number: 59715
Now (USD): $11,000.00

Crest Ultrasonics Custom In-Line Ultrasonic Cleaning System. Three heated Ultrasonic Cleaning Tanks: 12 in. L x 18 in. W x 10.5 in. H. Each has two ultrasonic generators. Stainless steel construction. 208V, 3 Ph, 50/60 Hz, 60A.

Product Details

Used UVOCS T10X10/OES

Inventory Number: 62019
Now (USD): $4,500.00

UVOCS T10X10/OES Ultra Violet Ozone Cleaning System. Active Area: 100 sq. in. Sliding parts tray height to 1.5 in. Lamp units 245 nm UV. Digital controller. 3 in. exhaust port. 110V, 60 Hz.

Product Details

Used Baron Blakeslee MLR-120LE-DS/ATH-35 SPL

Inventory Number: 62974
Now (USD): $35,000.00

Baron Blakeslee MLR-120LE-DS/ATH-35 SPL Bi-solvent Vapor Degreaser System. Equipment designed for Kyzen DA3520 Bi-solvent and Novec 71IPA solvent. Configured with one DA3520 immersion pre-clean tank and one solvent degreaser tank.  

MLR-120LE Solvent Degreaser:
125 percent Freeboard. 4 side tank insulation. All solvent wetted parts of stainless steel T-304 or greater. Magnetic drive spray pump with foot switch operated spray lance will allow you to manually clean your oversized PCB assemblies. Magnetic drive recirculation pump and filtration system. 10 micron cartridge filter. Aluminum motorized roll up cover.
Stainless steel T-304 water separator. Stainless steel cooling coils Hot Gas Bypass. VaporTrap™. Solvent vapor control (shuts off heat if primary refrigeration fails). High temperature control (prevents heater burnout). Digital liquid temperature control (controls solvent boiling temperature). Low Level Control (shuts off heat if solvent level falls to low). Vapor Up Control (prevents use of spray lance unless vapor zone is fully established). 

Working Dimensions:
Vapor Zone: 20 in. L x (L to R) x 12 in. W (front to back) x 10 in. H vapor zone.
Rinse Sump: 10 in. L x (L to R) x 12 in. W (front to back) x 10 in. H liquid level.

Baron Blakeslee Model ATH-35 SPL: 
Automatic Transporter/Hoist: This Hoist is a cantilevered type, two (2) dimensional material handling system. The transporter system consists of a cantilevered winch package system and support structure. It also includes control box and remote emergency stop button.

A2 DA3520 Immersion Pre-Clean Tank: 
Working Dimensions: 21 in. L (L to R) x 12 in. W
(front to back) x 10 in. immersion.
Freeboard: 5 in. H.
Heat Input: 1.5kW.
Power Supply: 240VAC, 1 Ph, 60 Hz.
Total Operational Solvent Fill: 14 Gallons.

NEW Never Installed, was $75,000 New

Product Details

Used Layton Technologies IMMASYS FS2012

Inventory Number: 63094
Now (USD): $6,500.00

Layton Technologies IMMASYS FS2012 IPA Cleaning System. PLC control for process flexibility and ease of use. Stainless steel construction. Bath Area: 27 in. L x 17 in. W x 12 in. D. 208/120V, 3 Ph, 50/60 Hz. Pulled from working environment but we are unable to test. Cooling coil compressor included with unit but will need to add refrigerant. Sold As Is.

Product Details

Used Baron Blakeslee MLR-120LE-DS/ATH-35 SPL

Inventory Number: 63209
Now (USD): $35,000.00

Baron Blakeslee MLR-120LE-DS/ATH-35 SPL Bi-solvent Vapor Degreaser System. Equipment designed for Kyzen DA3520 Bi-solvent and Novec 71IPA solvent. Configured with one DA3520 immersion pre-clean tank and one solvent degreaser tank.  

MLR-120LE Solvent Degreaser:
125 percent Freeboard. 4 side tank insulation. All solvent wetted parts of stainless steel T-304 or greater. Magnetic drive spray pump with foot switch operated spray lance will allow you to manually clean your oversized PCB assemblies. Magnetic drive recirculation pump and filtration system. 10 micron cartridge filter. Aluminum motorized roll up cover. 
Stainless steel T-304 water separator. Stainless steel cooling coils Hot Gas Bypass. VaporTrap™. Solvent vapor control (shuts off heat if primary refrigeration fails). High temperature control (prevents heater burnout). Digital liquid temperature control (controls solvent boiling temperature). Low Level Control (shuts off heat if solvent level falls to low). Vapor Up Control (prevents use of spray lance unless vapor zone is fully established). 

Working Dimensions:
Vapor Zone: 20 in. L x (L to R) x 12 in. W (front to back) x 10 in. H vapor zone.
Rinse Sump: 10 in. L x (L to R) x 12 in. W (front to back) x 10 in. H liquid level.

Baron Blakeslee Model ATH-35 SPL: 
Automatic Transporter/Hoist: This Hoist is a cantilevered type, two (2) dimensional material handling system. The transporter system consists of a cantilevered winch package system and support structure. It also includes control box and remote emergency stop button.

A2 DA3520 Immersion Pre-Clean Tank: 
Working Dimensions: 21 in. L (L to R) x 12 in. W 
(front to back) x 10 in. immersion.
Freeboard: 5 in. H.
Heat Input: 1.5kW.
Power Supply: 240VAC, 1 Ph, 60 Hz.
Total Operational Solvent Fill: 14 Gallons.

NEW Never Installed, was $75,000 New

Product Details