Equipment Photos

Equipment Details

Inventory Number: 61311
Category: Evaporators
Manufacturer: Edwards MBraun

OLED Deposition Thermal Evaporator with Partial Glove Box. Unit is not complete. The second glove box with the spin coater and the antechambers for both boxes are missing. When the controller was powered up it shows two glove boxes, one wth Edwards evaporator which we have and one with a photoresist spinner that is missing. Sold As Is.

Now (USD): $35,000.00

Products Similar to: Edwards MBraun Auto 306

Used Edwards Auto 306

Inventory Number: 61871
Now (USD): $17,000.00

Compact Thermal Evaporator Coating System. Dual thermal source, one resistive boat and one carbon rod. PLC graphical interface for system pumping. Built in gauges and power supplies. No substrate holder. Large stainless steel chamber with viewport in door. Chamber Size: 15 in. L x 15 in. W x 18 in. H. Built in diffusion pump with mechanical roughing pump.

Product Details

Used Edwards Auto 306

Inventory Number: 62101
Now (USD): $19,500.00

Resistive Thermal Deposition System with Film Thickness Monitor. PLC graphical interface for ease of operation. Fully reproducible parameters ensure consistent conditions. Crystal film thickness monitor. Substrate heater option. Built in turbo pump with roughing pump. Dual resistive type thermal sources. Liquid nitrogen trap. Built in gauges and power supplies. 12-inch dia. quartz bell jar with implosion guard. 208V, 1 Ph, 60 Hz, 25A, CE.

Product Details

Used Edwards Auto 306

Inventory Number: 61735
Now (USD): $15,950.00

FULLY TESTED AND READY TO SHIP!

Compact Thermal Evaporator Coating System. Laboratory size self-contained resistive thermal evaporator. Simple push button time saving operation using an automatic vacuum controller. Built-in gauges and power supply. High vacuum diffusion pump with roughing pump. 12 in. dia. quartz bell jar with implosion shield. 210V, 1 Ph, 60 Hz.

Product Details

Used IVI Corp. Box Coater

Inventory Number: 43794
Now (USD): $21,000.00

48 in. Thermal Evaporator. Used thin film deposition system. PC Controller. Sycon STC-200 Deposition Controller. Inside Pill Shape Dimensions: 48 in. L x 48 in. W x 48 in. H. Baseplate has 23 - 1 in. feedthroughs, 5 - 1-1/4 in. feedthroughs and 1 - 8 in. port. 6 - 2-1/2 in. ports. 13-1/2 in. port where motor drive comes into top of chamber. IVI 8930 Model 2205 Resistance Power Supply. Cryopump missing compressor and rough pump. 208V, 3 Ph, 60 Hz. Sold As Is.

Product Details

Used Unaxis BAK EVO (760)

Inventory Number: 47000
Now (USD): $85,000.00

Multiple Source Thermal Evaporator. Used thin film deposition system. Proven modular design box coater system can be easily configured for many applications. Currently configured with 3 shutters and 8 water cooled power feed throughs. 3 Inficon XTC crystal deposition monitors each controlled via Khan computer. Substrate carrier for 8 in. dia. substrates. Khan process control with user friendly graphics. Fully integrated multi-tasking PC-based control system, monitors all process data, manages process recipes with built in failure diagnostics. CTI-400 Cryopump with 9600 Compressor and Pump Package for quick pump down. Mfg. 2001. Very low hours. Sold As Is.

Product Details

Used Temescal FC-1800

Inventory Number: 53808
Now (USD): $69,000.00

Load-Locked Electron Beam Evaporator with Substrate Heaters. Used thin film deposition system. This fast cycle load-locked evaporator brings the bell jar down to operator level without sacrificing the throw distance. Cryo pumped high vacuum system with roughing pump. 4 pocket gun with Temescal CV-8 power supply. Inficon IC4 Desposition monitor. Bell Jar: 19-1/2 in. ID. Single substrate dome 17 in. dia. with rotation control. Includes substrate heaters. Auto valve sequencer.

Product Details

Used Temescal BJD-1800

Inventory Number: 55181
Now (USD): $49,000.00

Electron Beam Evaporator. Used thin film deposition system. Maxtek crystal deposition rate monitor. Four pocket E-Gun. CV-14 E Beam power supply with sweep controls. Vacuum gauges. CTI cryopump with compressor and roughing pump. Does not have substrate heaters.

Product Details

Used CHA SEC-1000-RAP

Inventory Number: 55643
Now (USD): $55,000.00

Dual Gun E Beam Evaporator. Used thin film deposition system. Two single pocket e-guns with individual power and sweep control. Inficon IC4 Plus deposition rate monitor. Temescal CV-8 E beam power supply. Auto-Tech II valve controller.  25.5 in. diameter water cooled stainless steel bell jar. CTI cryopump with compressor and roughing pump. Does not have substrate fixturing currently.

Product Details

Used Temescal BJD-1800

Inventory Number: 55702
Now (USD): $49,000.00

4 Pocket E-Beam Evaporator Upgraded by TES. Used thin film deposition system. Inficon XTC/2 crystal deposition monitor/controller. Three dome planetary configuration for 3 in. wafers. Rotation control. All system components mounted in cabinet except cryo compressor. CTI cryopump compressor with roughing pump. Auto valve controller. 4 pocket e-gun with turret source selector. Niles Electronics NE-6 E-Beam power supply. X-Y sweep controller. Water cooled 17.5 in. ID bell jar.

Product Details

Used CHA SE-1000-RAP

Inventory Number: 56323
Now (USD): $55,000.00

Multisource E Beam and Thermal Evaporation System for Optical Films and Oxygen Reactive Evaporations. Used thin film deposition system. Inficon IC-4 Plus rate and deposition controller. Six pocket electron beam source with SR-10 E-Beam power supply. Parts for optical monitor with system but not tested or covered under warranty. Two outrigger style filament resistance sources with 6 kW SCR controlled power supply. Automatic valve sequence controller. 25 in. dia. x 30 in. tall water cooled bell jar. Pressure control system for oxygen reactive evaporations. VHS-10 high speed diffusion pump with roughing pump. Quartz substrate heaters. Slide type fixturing for lift off process. Does not use substrate rotation type fixturing.

Product Details