Used Grundfos A96796825P31050

Grundfos A96796825P31050 Type CRN20-04A-P-G-V-HQQV Vertical Multistage Centrifugal Pump. Suction and discharge ports on the same level (in-line) enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easy service and access. H max 84.7 m, H 67.1 m. n = 3525/min. Q = 25.3 m^3/H. 380-480V, 3 Ph, 50/60 Hz, CE.

Shimadzu E1-2003M1 Turbopump Controller. Controller only, no cables.  5 Available.

Varian VHS-4 High Speed Diffusion Pump. Pumping Speed: 1200 l/s. Inlet Flange: 9 in. OD, 5.9 in. ID. Water cooled. 240V, 1 Ph, 60 Hz.

Osaka Vacuum TG-1810 Turbo Pump. Pump only, no controller. Volume Flow Rate: 1800 l/s. 10 in. ID ISO flange.

Varian VHS-4 High Speed Diffusion Pump. Pumping Speed: 1200 l/s. ASA Type Flange: 9 in. OD, 5.9 in. ID. Water cooled. 120V, 50/60 Hz.

Rietschle SAP 220 Combination Blow and Vacuum Pump Side Channel Vacuum Pump/Side Channel Blower. Can be operated as a vacuum pump or compressor. Works according to the dynamic compression principle utilizing a non-contact rotating impeller. Air inlet and outlets have built-in silencers. Airflow: 220 m^3/h. 200-480V, 3 Ph, 50/60 Hz.

Bell & Gossett 1510 Centrifugal End Suction Pump. 3000rpm, 175 max. psi, 15 h.p. Very good condtion. 208-460V, 3 Ph, 50/60 Hz. 1510 BF 6.125.

Grundfos A96796825P31050 Type CRN20-04A-P-G-V-HQQV Vertical Multistage Centrifugal Pump. Suction and discharge ports on the same level (in-line) enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easy service and access. H max 84.7 m, H 67.1 m. n = 3525/min. Q = 25.3 m^3/H. 380-480V, 3 Ph, 50/60 Hz, CE.

Varian VHS-4 High Speed Diffusion Pump. 9-inch OD ASA flange. Pumping Speed: 1200 l/s. 120V.

Grundfos A98329507P31233 Type CRN20-04A-P-G-V-HQQV Vertical Multistage Centrifugal Pump. Suction and discharge ports on the same level (in-line) enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easy service and access. H max 84.7 m, H 67.1 m. n = 3525/min. Q = 25.3 m^3/H. 380-480V, 3 Ph, 50/60 Hz, CE.