Equipment Photos

Equipment Details

Inventory Number: 64115
Category: Probers
Manufacturer: Wentworth

Wentworth 6" Manual Microanalytical Probing Station. Ideally suited for engineering analysis, evaluation, and trouble shooting of complex integrated circuits where probing down to the one micron level is necessary. Independent Z motion of microscope, probing platforms, and wafer chuck for application flexibility. 6" diameter wafer capability. A coarse, manual, coaxially driven stage provides 6" of wafer probing capability. Mitutoyo microscope with 10x eyepieces and a single 2X objective. Video camera with monitor.

Now (USD): $5,500.00

Products Similar to: Wentworth 6" Manual Prober

Used Cascade Microtech FPD-100

Inventory Number: 56790
Now (USD): $250.00

Cascade Microtech FPD-100 Vacuum Based Dual Probe Holder. These tools are for mounting two of the Cascade DCM 200 manipulators together on vacuum base for easy mounting and removal. $250 each.

Product Details

Used MPI LEDA-8F 3G Plus-V 110

Inventory Number: 58957
Now (USD): $15,000.00

MPI LEDA-8F 3G Plus-V 110 3G Wafer Prober. Plus-V is a wafer prober for testing diced die on stretch frame (dies on blue tape mounted on a tape ring). Wafers cut, broken by scribing, laser etc. and then expanded on stretch frame. May be tested to determine if any secondary operations have damaged the product. The maximum test area for the system is 6 inches of active die area or smaller. Machine Features: 3G Plus-V provides the functions of die position information saving, auto-probing, testing etc. It contains these advantages: * Automatic diced wafer alignment. * Rapid pre-scan provides fast die position information speeding test and increasing throughput. Probe station for testing LED light emitting diodes. Compact rigid and reliable semiautomatic chip probing system. PC controller. 5 in. dia. vacuum chuck. Four precision probe manipulators. StereoZoom microscope. WEI Industries Co. Ltd model LED-632HC LED tester. This controller tested for power only, not LED testing. 110V, 50/60 Hz.

Product Details

Used Wentworth 0-001-1096

Inventory Number: 48735
Now (USD): $950.00

Wentworth 0-001-1096 Vacuum Base Probe Manipulator. Micrometer on X-Y axis.

Product Details

Used Wentworth SPM 196

Inventory Number: 62937
Now (USD): $950.00

Wentworth SPM 196 Vacuum Base High Precision Probe Manipulator. X-Y-Z movement. Vacuum base.

Product Details

Used Wentworth 001-1146

Inventory Number: 62938
Now (USD): $950.00

Wentworth 001-1146 Precision Vacuum Base Probe Manipulator. X-Y-Z travel. Vacuum base.

Product Details

Used Karl Suss Probe

Inventory Number: 61414
Now (USD): $950.00

Karl Suss Precision High Resolution Vacuum Base Probe Manipulator. High resolution micropositioner provides ultra precise control needed for submicron wafer probing. Does not have tip holder, only what is in the photo.

Product Details

Used Micromanipulator 450

Inventory Number: 59531
Now (USD): $750.00

Micromanipulator 450 Vacuum Base Precision Probe Micropositioner. Used for micropositioning of test pin on a wafer prober.

Product Details

Used Cascade Microtech REL-6100

Inventory Number: 62821
Now (USD): $19,000.00

Cascade Microtech REL-6100 200mm Manual Submicron Analytical Wafer Prober. Parametric probe station combines precision sub-micron probing capability with superior measurement performance necessary for DC/CV analysis. Manual movement of X-Y stage. Excellent stability for probing wafers up to 200mm. Power assisted tilt back microscope and platen lift handle. 8-inch dia. vacuum chuck with 203mm x 203mm X-Y travel and a resolution of 0.2 µm. Platen accepts magnetic or vacuum base probe manipulators and has a  vertical travel of 50.8mm and a resolution of 1 µm. Mitutoyo microscope with two long working distance objectives. Heavy duty microscope bridge.

Product Details

Used Alessi MH-4

Inventory Number: 62068
Now (USD): $950.00

Alessi MH-4 Vacuum Base Precision Probe Manipulator. High resolution micropositioner provides ultra precise control needed for submicron probing. Micrometer adjustment of X-Y-Z axis.

Product Details

Used Cascade Microtech Summit 9000

Inventory Number: 64018
Now (USD): $8,000.00

Cascade Microtech Summit 9000 Analytical Probe Station The Summit 9000 uses a flexible, modular design to accommodate the full range of Cascade microwave and digital microprobing tools. Square 6” x 6” wafer stage. Independent stage vacuum permits an impedance standard substrate, a constant substrate and a test wafer to be carried simultaneously. X-Y stage transition and linear Z-lift.

Product Details