Equipment Photos

Equipment Details

Inventory Number: 57693
Category: Evaporators
Manufacturer: Davis & Wilder

Davis & Wilder 35SC-5454 Very Large Box Coater. Inside Chamber Dimensions (at narrowest point): 54 in. W x 54 in. H x 40 in. D. Empty chamber, no pumps. Sold As Is.

Now (USD): $12,000.00

Products Similar to: Davis & Wilder 35SC-5454

Used Temescal FC-1800

Inventory Number: 53808
Now (USD): $69,000.00

Temescal FC-1800 Load-Locked Electron Beam Evaporator with Substrate Heaters. This fast cycle load-locked evaporator brings the bell jar down to operator level without sacrificing the throw distance. Cryopumped high vacuum system. Four pocket gun with Temescal Simba power supply. Bell Jar: 19½” I.D. Single substrate dome 17” dia. with rotation control. Includes substrate heaters. Auto valve sequencer. Needs hinge repaired.

Product Details

Used CHA Bell Jar

Inventory Number: 57144
Now (USD): $950.00

CHA Bell Jar. Stainless steel. 25.75 in. OD, 29 in. tall.

Product Details

Used CHA SE-1000

Inventory Number: 57367
Now (USD): $55,000.00

CHA SE-1000 E-Beam Evaporator Deposition System. Used thin film deposition system. Electron beam high vacuum deposition system. Inficon IC4 crystal deposition rate monitor. Temescal CV-14 14 kW E-Beam power supply. Four pocket E-Gun. CTI cryopump with compressor and roughing pump. Quartz lamps for substrate heating. Automatic or manual vacuum valve sequencing. Water cooled stainless steel 25 in. dia. bell jar with hoist.

Product Details

Used CHA SE-600-RAP

Inventory Number: 57536
Now (USD): $45,000.00

CHA SE-600-RAP Single Pocket E-Beam Evaporator. Used thin film deposition system. Inficon IC6000 crystal deposition monitor. Triple dome planetary for 3 in. wafers. Automatic or manual valve control. Diffusion pump. Motorized hoist. 19 in. dia. bell jar. Temescal CV-8 E-beam power supply with controls. Single pocket e-gun with shutter.

Product Details

Used CHA SE-600

Inventory Number: 57550
Now (USD): $49,500.00

CHA SE-600 High Vacuum E-Beam Evaporation System. Used thin film deposition system. PVD physical vapor deposition system. 19 in. dia. water cooled bell jar. Triple dome planetary fixturing currently configured for 3 in. dia. wafers. Inficon IC6000 crystal deposition rate monitor. Automatic valve sequencer. Four pocket E-gun with manual rotation control. Does not have auto pocket sequencer, manual only. Temescal CV-8 E-Beam power supply with controls. System uses a Varian VHS-6 diffusion pump for high vacuum.

Product Details

Used Davis & Wilder 3520BC

Inventory Number: 57715
Now (USD): $12,000.00

Davis & Wilder 3520BC Large Vacuum Chamber. Inside Chamber Size: 54 in. W x 54 in. H x 40 in. D. Empty chamber, no pumps. Sold As Is.

Product Details

Used IVI Corp. Box Coater

Inventory Number: 57766
Now (USD): $14,500.00

IVI Corp. Box Coater. PC controller. Crystal deposition rate controller. Heater power supply, quartz lamps inside. Resistance power supply. Inside Dimensions: 27 in. L x 27 in. D x 30 in. H. System does not have cryo or roughing pumps. Sold As Is, not complete.

Product Details

Used Temescal BJD-1800

Inventory Number: 62676
Now (USD): $39,000.00

Temescal BJD-1800 E-Beam Vacuum Deposition Evaporator. Low profile vacuum deposition system has the substrate holder waist height for easy access. Four pocket E-Gun with Temescal Simba 2 power supply. Quartz substrate heaters with digital temperature control. Inficon IC5 crystal deposition rate controller. Automatic and manual vacuum control capability. CTI 8 cryopump with compressor but unit does not come with a roughing pump. Sold As Is. System can be sold fully tested with warranty for an additional cost. 

Product Details

Used Edwards Auto 306

Inventory Number: 62878
Now (USD): $15,000.00

Edwards Auto 306 Multiple Source Resistive Thermal Evaporator with Crystal Deposition Monitor. Continuous uniform coating of irregular surfaces with conductive materials. Simple push button time saving operation using automatic vacuum controller. Crystal deposition monitor for film thickness control. Compact modern design with all gauges and pumps in a single cabinet. 12-inch dia. quartz bell jar with implosion guard. Rotating thermal source selector can accommodate up to four resistive sources. Rotating specimen holder with speed control. Built in diffusion pump with roughing pump. 208V, 1 Ph, 60 Hz, CE.

See video Demonstration at this address

Product Details

Used Createc SFC-40-10-180-HL-WK-SH

Inventory Number: 63170
Now (USD): $3,950.00

Createc SFC-40-10-180-HL-WK-SH Single Filament Effusion Cell with Power Supply. Deposition source. 2-3/4 in. OD conflat flange. 120V, CE marked.

Product Details