Equipment Photos

Equipment Details

Inventory Number: 62701
Category: Probers
Manufacturer: Cascade Microtech

Cascade Microtech 12000 200mm Semiautomatic Analytical Probe Station with MicroChamber and Heated Chuck. MicroChamber™ isolates and shields the chuck from external environment. This eliminates electromagnetic and electrostatic interference. You make measurements inside an integral, low noise, shielded and light-tight chamber. Sturdy optics bridge mount with 8 in. x 5 in. travel for analytical microscope. Mitutoyo microscope with single long working distance objective. Vibration isolation table built just for this type of prober. 200mm thermal chuck with Temptronic TPO3010B-2300-1 temperature controller and a temperature range of 0 to +200 deg C. Easy to use graphical user interface guide you through prober tasks. X-Y stage resolution 0.1 micron with an accuracy of +/- 2 micron. Handles up to eight vacuum mount, magnetic-mount or fixed mount positioners. Safely load and unload DUTs with easy access and locking roll out stage.

Now (USD): $62,500.00

Products Similar to: Cascade Microtech 12000

Used Cascade Microtech 12000

Inventory Number: 63040
Now (USD): $45,000.00

Cascade Microtech 12000 8-inch Semiautomatic Analytical Probe Station. You make measurements inside an integral, low noise, shielded and light-tight microchamber. The Summit 12000 Series assures access to the full measurement range offered by todays top test instrumentation. Easy to use graphical user interface guides you through testing tasks. 8-inch dia. chuck with 203mm x 203mm travel with a resolution of 0.1 micron and an accuracy of less than or equal to +/- 2 micron. 115/230V, 50/60 Hz, 4/2A, CE.

Product Details

Used Wentworth 034-4002

Inventory Number: 48801
Now (USD): $450.00

Wentworth 034-4002 Probe Contact Box.

Product Details

Used Integrated Technology Corp. PB500A

Inventory Number: 50143
Now (USD): $6,500.00

Integrated Technology Corp. PB500A Probe Card Repair and Analysis Station. Computer controlled system fully tests and exercise the probe card and allows complete statistical monitoring of probe card performance. Planarization, current leakage and resistance testing. Full database kept on each probe card for statistical process control.

Product Details

Used Cascade Microtech FPD-100

Inventory Number: 56790
Now (USD): $250.00

Cascade Microtech FPD-100 Vacuum Based Dual Probe Holder. These tools are for mounting two of the Cascade DCM 200 manipulators together on vacuum base for easy mounting and removal. $250 each.

Product Details

Used Signatone CM400

Inventory Number: 58293
Now (USD): $1,500.00

Signatone CM400 Automated Analytical Probe Station. Not complete, sold as is for parts.

Product Details

Used Wentworth MP-2000

Inventory Number: 58353
Now (USD): $2,950.00

Wentworth MP-2000 200mm Programmable Analytical Prober. Being sold AS IS since we do not have the computer or software to test this. Was able to check theta rotation, platform up and down and microscope up and down. No microscope with system. 8 in. dia. vacuum chuck.

Product Details

Used MPI LEDA-8F 3G Plus-V 110

Inventory Number: 58957
Now (USD): $15,000.00

MPI LEDA-8F 3G Plus-V 110 3G Wafer Prober. Plus-V is a wafer prober for testing diced die on stretch frame (dies on blue tape mounted on a tape ring). Wafers cut, broken by scribing, laser etc. and then expanded on stretch frame. May be tested to determine if any secondary operations have damaged the product. The maximum test area for the system is 6 inches of active die area or smaller. Machine Features: 3G Plus-V provides the functions of die position information saving, auto-probing, testing etc. It contains these advantages: * Automatic diced wafer alignment. * Rapid pre-scan provides fast die position information speeding test and increasing throughput. Probe station for testing LED light emitting diodes. Compact rigid and reliable semiautomatic chip probing system. PC controller. 5 in. dia. vacuum chuck. Four precision probe manipulators. StereoZoom microscope. WEI Industries Co. Ltd model LED-632HC LED tester. This controller tested for power only, not LED testing. 110V, 50/60 Hz.

Product Details

Used Wentworth 0-001-1096

Inventory Number: 48735
Now (USD): $950.00

Wentworth 0-001-1096 Vacuum Base Probe Manipulator. Micrometer on X-Y axis.

Product Details

Used TMC Table and Dark Box

Inventory Number: 59481
Now (USD): $2,950.00

TMC Vibration Isolation Table with Dark Box. Table Dimensions: 44 in. L x 33 in. W x 32 in. H. Box Outside Dimensions: 48 in. L x 37 in. W x 36 in. H. Pneumatic isolation legs.

Product Details

Used Wentworth 001-1123

Inventory Number: 59709
Now (USD): $650.00

Wentworth 001-1123 Precision Vacuum Base Probe Manipulator.

Product Details