Used
ADVANCED IMAGING INC.
ROUGH LAP STATION Polishing System.
Heavy duty polishing system.
18 in. dia. polishing wheel capable of holding 4 specimen rings.
Digital RPM readout. Motor timer. 115V, 60 Hz.
Inventory#:
55418
Used
BUEHLER
FIBRMET Portable Optical Fiber Polisher.
Quick and accurate means for polishing optical fiber ends to maximize light transmission.
No travel cover with unit. 115V, 60 Hz.
Inventory#:
52619
Used
BUEHLER
FIBRMET Portable Optical Fiber Polisher.
Quick and accurate means for polishing optical fiber ends to maximize light transmission.
No travel cover with unit.
115V, 60 Hz
Inventory#:
52732
Used
BUEHLER
FIBRMET Portable Optical Fiber Polisher.
Quick and accurate means for polishing optical fiber ends to maximize light transmission.
No travel cover with unit.
115V, 60 Hz.
Inventory#:
52318
Used
BUEHLER
FIBRPOL Optical Fiber Polishing System.
Volume polishing of optical fiber and connectorized cable.
Semiautomatic system has the capability to simultaneously polish up to 40 optical fiber connectors.
115V, 60 Hz, 11A.
Inventory#:
55272
Used
BUEHLER
POLIMET I Triple Wheel Polishing Table.
Table with three Polymet polisher/grinders.
Each polisher/grinder with independent controls. 8 in. bronze wheels with infinitely variable speeds.
100 to 1200 rpm and tachometer reading.
Two rinse sinks. Table length: 72-1/2 in.
115V, 60 Hz, 30A.
Inventory#:
54957
Used
BUEHLER
POLIMET I Dual Wheel Polishing Table. Table with two Polymet polisher/grinders. Each polisher/grinder with independent controls. 8 in. bronze wheels with infinitely variable speeds. 100 to 1200 rpm and tachometer reading. Single rinse sink. Table length: 52-1/2 in. 115V, 60 Hz, 20A.
Inventory#:
55032
Used
LAPMASTER
15PB Polishing and Lapping System.
Two Lapmaster 15 in. polishing systems mounted in a 7 ft. plastic work bench.
One system has a metal lapping plate and three variable speed ring motors for handling 3 samples.
The other plate is a polishing plate with two variable speed ring motors for 2 samples.
Digital plate speed readout. 115V, 60 Hz.
Inventory#:
55459
Used
LAPMASTER
LSP-6 Precision Dual Face Lapping Machine.
Flat polishing plates without cross hatch: 15.2 in. dia.
Digital programmable controller.
The top and bottom plates are driven and so are the inner and outer gears.
230V, 3 Ph, 60 Hz.
Inventory#:
52533
Used
LOGITECH
1WBT2 Three Station Fully Automatic Wafer Bonder
Used for bonding II-VI and III-V substrates to support disks for polishing or lapping.
Can be used to mount parts of wafers or whole wafers up to 100 mm.
Adjustable pressure and temperature with digital display of settings and actual parameters.
Inventory#:
46870
Used
LOGITECH
BC3000 3 Station Vacuum Bonding System.
Bonds fragile materials such as GaAs, InP or silicon.
Can be used to mount whole or part wafers up to 4 in. dia.
Will produce consistently high standards of wafer to wafer support disk parallism.
Includes vacuum pump.
Inventory#:
42900
Used
LOGITECH
GI 20 High Precision Flatness Measurement System.
Suitable for lapped and polished surfaces up to 150 mm dia.
This grazing incidence interferometer allows rapid and accurate measurements
to be made “in process” and displays the interogram on a 7 in. CRT.
110V, 60 Hz, 1.6A.
Inventory#:
53476
Used
LOGITECH
JIG Polishing Jig.
This jig is for 2 in. mounted samples.
Does not have vacuum option.
Can also be used as clamp holding fixture.
Inventory#:
53494
Used
LOGITECH
PM2A Polishing System.
Variable Speed Control: 0 to 70 rpm. Process timer. 12 in. dia.polishing plate.
Does not include cylinder for slurry dispense. 110V, 60 Hz.
Older system but sold in good working condition.
Inventory#:
55176
Used
LOGITECH
VS2 Vacuum System with Water Trap.
Vacuum pump and water separator for Logitech polishers.
Two port system. 115V, 50/60 Hz.
Inventory#:
53597
Used
NORD ENGINEERING
P-8-10-ETDC 10 Spindle Production Polishing Machine.
Precision optical polishing system.
For lens blocks up to 8 in. dia.
Overarm pressure for each spindle via air cylinder activated by a toggle switch.
Each two spindles are driven by a common 1 hp motor.
Oscillation is achieved by a gear reducer motor, adjustable eccentric which pivots the overarm.
Spindle Speed: 50 to 600 rpm.
220V, 1 Ph, 60 Hz, 40A.
Inventory#:
51292
Used
NOVA FINISHING SYSTEMS
Nova 253 SHDT Super Heavy Duty Tabletop Vibratory Mill.
1/4 cu. ft. machine can process the amount of parts you can get into
a 3 in. x 3 in. x 3 in. box with a total weight of 12 lbs.
115V, 60 Hz, 8.8A.
Inventory#:
54603