Robots - Stages - Material Handling
Used Robots - Stages - Material Handling
Refurbished with a 30 Day Right of
Return and 3-Month Warranty! (Unless sold "AS-IS" * )
Within this category
Use pulldown arrow to select category, then
hit Search! If you would like
to narrow the search, you can add additional search terms (manufacturer,
etc) in the search box. Or you can select "ALL Items" for category and
just use the search box to search for a term.
UNIDEX 12R -- $1,250
Multi-Axis Stage Controller. Linear interpolation and velocity profiling in a high performance, 1- to 2-axis controller. Large 30 KB program memory, up to 99 programs storable. Versatile programming features include branching, nested subroutines, and high speed interrupt capabilities.
Large stage previously used inside Opal 7830I microscope under high vacuum. Includes power unit. Requires external control besides power box. Stage Movement: 8 in. x 15 in.
EPI Reactor Loader. Built to interface EPI Reactor with a Smith Interface. Accufab Systems Model 1250 series robot and controller module. 5-1/4 in. disk drive. (2) 8 in. cassettes.
Stage: 4-3/4 in. x 3-7/8 in. Cradle: 7 in. on inside of arc. Superior electric synchronous stepping motor MO63-LS09 with a SLO-SYN 430-PI indexer motor drive.
Motorized Z Translation Stage. Vertical movement translation stage. Travel Range: +/-4.5 mm (9 mm). VE-72 stepper motor. Load Capacity: Up to 30 kgf. Stage size excluding motor: 252 x 168.
Resolution: 1 micro-meter. Stage only no controller.
17 PCZ 003
3 Channel Piezoelectric Controller with Feedback. 3 channel controller for use with the ultraprecision 17 PAZ range of active feedback actuators and similar actuators incorporated in various Melles Griot nanopositioners. Output Voltage: 0-75 VDC, SMC screw connectors. Each channel with two front-panel BNC 0-10 VDC inputs, SUMmed or DIFFerenced with output from 10-turn manual offsetting potentiometers. Voltage Stability: 100 ppm over 24 hours. Position Mode (0-20 micrometer piezo): 1 nm display resolution, less than 5 nm accuracy, less than 5 nm repeatability, +/- 0.5 percent output linearity.
Manual Drive Goniometric Cradle with Encoder. Rotates about a transverse axis above the platform. Offers max. free access to the rotating part. Features 0.001 degree angular resolution. +/-45 degree transverse axis rotation.